SOUTH BOSTON, MA —
OSHA Inspection: CAG CONSTRUCTION LLC
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of CAG CONSTRUCTION LLC in 45 W. THIRD STREET, SOUTH BOSTON, MA 02127 (NAICS 238170). OSHA activity number 342893062.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CAG CONSTRUCTION LLC
- Site address
- 45 W. THIRD STREET
- City
- SOUTH BOSTON
- State
- MA
- ZIP
- 02127
- Mailing
- 2 MARKLE CIRCLE, RANDOLPH, MA 02368
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 3
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.501 B01
- Issued
- May 18, 2018
- Penalty
- Initial $2,356 · Current $2,356
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. Location: Job site Employees were exposed to a fall hazard of approximately 44 feet while working on the fourth floor roof.
Recent events (1)
- — Z (S) $2356
1926.1053 B13
- Issued
- May 18, 2018
- Abate by
- May 29, 2018
- Penalty
- Initial $2,827 · Current $2,827
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: Location; An employee stood on the top step of a step ladder while working.
Recent events (1)
- — Z (S) $2827
1926.1153 D02 I
- Issued
- May 18, 2018
- Abate by
- Jun 18, 2018
- Penalty
- Initial $3,880 · Current $3,880
General-duty citation text
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: Jobsite: The company has not assessed employee exposure to respirable crystalline silica from the cutting of Hardie Board with a Miter saw.
Recent events (1)
- — Z (S) $3880
1926.1153 E02
- Issued
- May 18, 2018
- Abate by
- Jun 18, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(e)(2): Where respirator use is required by this section, the employer did not institute a respiratory protection program in accordance with 29 CFR 1910.134: Jobsite: Instance A: An employee using a Miter Saw to cut Hardie board was not medically evaluated to determine his fitness to wear a respirator. Instance B: The company does not have a written respirator program to govern respirator use. Instance C: An employee using a respirator was not adequately trained in its use.
Recent events (1)
- — Z (S) $0
1926.1153 G01 I
- Issued
- May 18, 2018
- Abate by
- Jun 4, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(g)(1)(i): The exposure control plan did not contain a description of the tasks in the workplace that involve exposure to respirable crystalline silica: Jobsite: The company's written exposure control plan did not describe the cutting of fiber cement board as a task that involves exposure to respirable silica dust.
Recent events (1)
- — Z (S) $0
1926.1153 G01 II
- Issued
- May 18, 2018
- Abate by
- Jun 11, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(g)(1)(ii): The exposure control plan did not contain a description of the engineering controls, work practices, and respiratory protection used to limit employee exposure to respirable crystalline silica for each task: Jobsite: The employer's exposure control plan did not describe the engineering, work practice or respiratory protection controls used to limit employees exposure to respirable silica from the cutting of Hardie board.
Recent events (1)
- — Z (S) $0
More inspections at CAG Construction LLC
View CAG Construction LLC's full OSHA safety record →
More inspections in this industry (NAICS 238170)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342893062.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.