SOUTH ROXANA, IL —
OSHA Inspection: GEMINI MANUFACTURING, LLC DBA GEMINI INDUSTRIES, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GEMINI MANUFACTURING, LLC DBA GEMINI INDUSTRIES, LLC in 1 GEMINI INDUSTRIAL DR, SOUTH ROXANA, IL 62087 (NAICS 541870). OSHA activity number 342905429.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GEMINI MANUFACTURING, LLC DBA GEMINI INDUSTRIES, LLC
- Site address
- 1 GEMINI INDUSTRIAL DR
- City
- SOUTH ROXANA
- State
- IL
- ZIP
- 62087
- Mailing
- 1 GEMINI INDUSTRIAL DR, ROXANA, IL 62084
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 541870
- Employees
- 47
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A02
- Issued
- May 21, 2018
- Abate by
- Jun 15, 2018
- Penalty
- Initial $6,596 · Current $4,617 Reduced
General-duty citation text
29 CFR 1910.212(a)(2): Guard(s) on machine(s) were not affixed to the machine or secured elsewhere when attachment to the machine was not possible: In the Production Room: a) on the Zun #3 flatbed printer - the guard was removed from the gantry mechanism, exposing fiber belt drive, gears, and the steel belt. b) on the Zun M-800 CV flatbed printer - the guard was removed from the gantry mechanism, exposing fiber belt drive, gears, and the steel belt. c) on the Zun #1 flatbed printer - the guard was removed from the gantry mechanism, exposing fiber belt drive, gears, and the steel belt.
Recent events (2)
- — I (S) $4617.2
- — Z (S) $6596
1910.305 G01 IV A
- Issued
- May 21, 2018
- Abate by
- Jun 15, 2018
- Penalty
- Initial $3,297 · Current $2,308 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: In the Production Room, south side, a 110 volt flexible cord was hard wired into an electrical box to supply electricity to a computer at a desk.
Recent events (2)
- — I (S) $2307.9
- — Z (S) $3297
1910.22 A01
- Issued
- May 21, 2018
- Abate by
- Jun 15, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces were not kept in a clean, orderly, and sanitary condition: In the Production Room, middle area, south side wall - A flexible electrical cable and a data cable were laying the floor in an aisle, where employees travel, creating a tripping hazard.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 C01
- Issued
- May 21, 2018
- Abate by
- Jun 15, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: Production Room, middle area, south wall: A mounted fire extinguisher had material stored on the floor in the are directly in front of it.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 541870)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342905429.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.