FLOWER MOUND, TX —
OSHA Inspection: JMV CORNICE CONSTRUCTION, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JMV CORNICE CONSTRUCTION, LLC in 3104 KINGSBARNS, FLOWER MOUND, TX 75028 (NAICS 238130). OSHA activity number 342912128.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JMV CORNICE CONSTRUCTION, LLC
- Site address
- 3104 KINGSBARNS
- City
- FLOWER MOUND
- State
- TX
- ZIP
- 75028
- Mailing
- 621 COLLEGE ST., GRAND PRAIRIE, TX 75050
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 4
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.102 A01
- Issued
- Feb 5, 2018
- Penalty
- Initial $1,413 · Current $800 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: On or about January 26, 2018, an employee was exposed to struck-by hazards due to not wearing eye protection while utilizing a pneumatic nail gun to secure siding materials on a newly constructed home.
Recent events (2)
- — I (S) $800
- — Z (S) $1413
1926.451 B01
- Issued
- Feb 5, 2018
- Abate by
- Mar 6, 2018
- Penalty
- Initial $2,772 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii) On January 26, employer exposed employee to fall hazards due to the scaffold not being fully planked.
Recent events (2)
- — I (S) $1000
- — Z (S) $2772
1926.451 A06
- Issued
- Feb 5, 2018
- Abate by
- Mar 6, 2018
- Penalty
- Initial $2,772 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.451(a)(6): Scaffolds were not constructed in accordance with the design by a qualified person: On January 26, 2018, at a residential construction site, employees working from a job built wooden scaffold system were exposed to fall hazards. The employer did not ensure a qualified person designed and constructed the scaffold system to prevent fall hazards.
Recent events (2)
- — I (S) $1200
- — Z (S) $2772
1926.451 C02
- Issued
- Feb 5, 2018
- Abate by
- Mar 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames, or uprights did not bear on base plates, mud sills or other adequate firm foundation: On January 26, 2018, the employer exposed employees to fall hazards due to scaffold missing mud sills and base plates.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.452 A04
- Issued
- Feb 5, 2018
- Abate by
- Mar 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.452(a)(4): Diagonal bracing in both directions were not installed across the entire outside face of all double- and single-pole scaffolds. On January 26, 2018, at a residential construction site, employees working from a job built scaffold system and the employer did not ensure cross braces were installed exposing the employees to the hazard of falling
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 G01 V
- Issued
- Feb 5, 2018
- Abate by
- Mar 6, 2018
- Penalty
- Initial $2,217 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.451(g)(1)(v): Each employee on a walkway located within a scaffold was not protected by a guardrail system (with a minimum 200 pound toprail capacity) installed within 9.5 inches (24.1 cm) of and along at least one side of the walkway. On January 26, 2018, the employer exposed employees to fall hazards due to no guardrails were installed on the scaffold.
Recent events (2)
- — I (S) $1000
- — Z (S) $2217
More inspections at JMV Cornice Construction, LLC
View JMV Cornice Construction, LLC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342912128.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.