Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: STEPHENS PIPE AND STEEL, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of STEPHENS PIPE AND STEEL, LLC in 300 STREIBEIGH LANE, MONTOURSVILLE, PA 17754 (NAICS 332999). OSHA activity number 342915816.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Stephens Pipe and Steel, LLC — free Get an email when a new federal OSHA severe-injury report for Stephens Pipe and Steel, LLC is published. One employer, no account, unsubscribe in one click.
Site address
300 STREIBEIGH LANE
City
MONTOURSVILLE
State
PA
ZIP
17754
Mailing
300 STREIBEIGH LANE, MONTOURSVILLE, PA 17754
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
15
Ownership type
A

5 citations on file for this inspection.

1910.36 D01

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 13, 2018
Penalty
Initial $6,282 · Current $4,080 Reduced
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge:    a) Warehouse: A chain and combination padlock were affixed to the emergency exit doors preventing egress in an emergency event, as observed on or about January 31, 2018.    Abatement Observed During Inspection.
Recent events (2)
  • — I (S) $4080
  • — Z (S) $6282

1910.157 G01

Serious Gravity 1 1 instance 4 exposed
Issued
Feb 13, 2018
Abate by
Apr 2, 2018
Penalty
Initial $4,712 · Current $3,210 Reduced
29 CFR 1910.157(g)(1): An educational program was not provided for all employees to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting:    a) Warehouse: Employees were not provided training to familiarize them with the general principles of fire extinguisher use and the hazards of incipient stage fire fighting, on or about January 31, 2018.    Abatement Certification Required.
Recent events (2)
  • — I (S) $3210
  • — Z (S) $4712

1910.157 C04

Serious Gravity 1 2 instances 4 exposed
Issued
Feb 13, 2018
Abate by
Apr 2, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.157(c)(4): Portable fire extinguishers were not maintained in a fully charged and operable condition:  a) Warehouse: Portable fire extinguishers, located in the hardware department and within truck #313, were not maintained in a fully charged and operable condition, as observed on or about January 31, 2018.  Abatement Certification Required.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.157 C01

Serious Gravity 1 2 instances 1 exposed
Issued
Feb 13, 2018
Abate by
Apr 2, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:  a) Warehouse: Portable fire extinguishers located in the PVC and aluminum warehouses were blocked by stored materials and not readily accessible, as observed on or about January 31, 2018.  Abatement Certification Required.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A01

Serious Gravity 1 1 instance 3 exposed
Issued
Feb 13, 2018
Abate by
Apr 2, 2018
Penalty
Initial $4,712 · Current $3,210 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a) Warehouse: The guard for the lower wheel and blade on the Marvel Series 8 Mark III metal band saw was removed exposing the equipment to contact, as observed on or about January 31, 2018.    Abatement Certification Required.
Recent events (2)
  • — I (S) $3210
  • — Z (S) $4712

View Stephens Pipe and Steel, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342915816.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.