OTTAWA, KS —
OSHA Inspection: FASHION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FASHION, INC. in 1019 E. NORTH STREET, OTTAWA, KS 66067 (NAICS 332322). OSHA activity number 342945417.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FASHION, INC.
- Site address
- 1019 E. NORTH STREET
- City
- OTTAWA
- State
- KS
- ZIP
- 66067
- Mailing
- PO BOX 1050, OTTAWA, KS 66067
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 48
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- May 1, 2018
- Abate by
- May 25, 2018
- Penalty
- Initial $5,174 · Current $3,104 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: Employees engaged in maintenance activities on the Komatsu plasma CNC table were exposed to, but not limited to, burns and contact with an energized source in that procedures were not developed to identify all power sources involved in the Lockout process.
Recent events (2)
- — I (O) $3104.4
- — Z (S) $5174
1910.215 A04
- Issued
- May 1, 2018
- Abate by
- May 25, 2018
- Penalty
- Initial $3,880 · Current $2,328 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: Employees engaged in material grinding operations at the DeWalt pedestal grinder in the weld/fab shop were exposed to caught-in hazards in that the work rest was not adjusted to within 1/8" of the grinding wheel.
Recent events (2)
- — I (S) $2328
- — Z (S) $3880
1910.215 B09
- Issued
- May 1, 2018
- Abate by
- May 25, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: Employees engaged in material grinding operations at the DeWalt pedestal grinder in the weld/fab shop were exposed to struck-by hazards in that the tongue guard was not adjusted to within 1/4" of the grinding wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 A
- Issued
- May 1, 2018
- Abate by
- May 25, 2018
- Penalty
- Initial $3,880 · Current $2,328 Reduced
General-duty citation text
29 CFR 1910.242(a): Hand and portable powered tools or equipment were not kept in safe condition: Employees engaged in material cutting activities utilizing the DeWalt Chop saw in the shop area were exposed to flying chips, sparks, and debris in that the manufactured self adjusting guard had been removed.
Recent events (2)
- — I (S) $2328
- — Z (S) $3880
1910.305 B01 I
- Issued
- May 1, 2018
- Abate by
- May 25, 2018
- Penalty
- Initial $5,174 · Current $3,104 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions: Employees engaged in material handling operations at the AccurShear were exposed to shock hazards in that the cord for the LED lighting attached above the shear was not provided with a proper fitting to protect against abrasions when entering into the junction box.
Recent events (2)
- — I (S) $3104.4
- — Z (S) $5174
1910.305 G01 IV A
- Issued
- May 1, 2018
- Abate by
- May 25, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: Employees engaged in material handling operations at the AccurShear were exposed to shock hazards in that the flexible cord utilized to supply power to the LED Lighting above the AccurShear was utilized as a substitute for fixed wiring.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Fashion, INC.
View Fashion, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342945417.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.