Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CHRISTENSEN LUMBER, INC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of CHRISTENSEN LUMBER, INC in 20300 W 207TH ST, SPRING HILL, KS 66083 (NAICS 321214). OSHA activity number 342995636.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Christensen Lumber, INC — free Get an email when a new federal OSHA severe-injury report for Christensen Lumber, INC is published. One employer, no account, unsubscribe in one click.
Site address
20300 W 207TH ST
City
SPRING HILL
State
KS
ZIP
66083
Mailing
20300 W 207TH ST, SPRING HILL, KS 66083
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321214
Employees
51
Ownership type
A

5 citations on file for this inspection.

1910.132 D01

Other-than-serious Gravity 5 1 instance 2 exposed
Issued
Apr 27, 2018
Penalty
Initial $8,315 · Current $4,158 Reduced
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE):      Employees performing frame work at the production area were exposed hazards including, but not limited to struck-by hazards to the eyes, and amputation hazards in that a hazard assessment of the work area had not been completed.
Recent events (2)
  • — I (O) $4157.5
  • — Z (S) $8315

1910.147 C04 I

Other-than-serious 1 instance 51 exposed
Issued
Apr 27, 2018
Penalty
Initial $11,641 · Current $5,821 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    Maintenance employees and operators in the production area were exposed to struck-by, caught-between, and amputation hazards in that machine specific lock out/ tag out written procedures had not been developed for equipment with pneumatic and electrical sources of energy, including but not limited to the following:        a) Up cut saw       b) Nailing Bridge       c) Monet Saw       d) Router       e) Door Machine       f) V Nailer      g) Casing saw       h) Omni Saw       i) PF 90 Saw       j) Roof Gantry 1 and 2       k) Floor Gantry 1 and 2       l ) Splicer
Recent events (2)
  • — I (O) $5820.5
  • — Z (S) $11641

1910.213 G01

Serious Gravity 10 1 instance 3 exposed
Issued
Apr 27, 2018
Penalty
Initial $11,641 · Current $5,821 Reduced
29 CFR 1910.213(g)(1): Swing cutoff saw(s) were not provided with an automatically adjusting hood that completely enclosed the upper half of the saw, the arbor end, and the point of operation at all positions of the saw:  On or about 02/26/2018, in the production area, employees cutting lumber using the Whirlwind cut off saw were exposed to amputation hazards in that the saw blade was not adequately guarded.
Recent events (2)
  • — I (S) $5820.5
  • — Z (S) $11641

1910.1200 H01

Other-than-serious 1 instance 51 exposed
Issued
Apr 27, 2018
Penalty
Initial $4,989 · Current $2,495 Reduced
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    Employees working at production area were exposed to skin and eye irritation hazards in that the employer had not provided all employees, including temporary worker(s) with adequate hazard communication training to become aware of the hazards associated with the chemicals present in the workplace including, but not limited to diesel, propane, motor oil, lubricants, and spray paint.
Recent events (2)
  • — I (O) $2494.5
  • — Z (S) $4989

1904.31 A

Other-than-serious 2 instances 1 exposed
Issued
Apr 27, 2018
Abate by
May 16, 2018
Penalty
Initial $1,663 · Current $832 Reduced
29 CFR 1904.31(a): Recordable injuries and illnesses of all company employees including labor, executive, hourly, salary, part-time, seasonal, or migrant workers and employees who were not on the company payroll but supervised by the employer were not recorded on the OSHA 300 log:  The employer did not did not record recordable injuries on the OSHA 300 log for temporary employees in the following instances:  a) On or about 02/23/2018, finger punctured by nail b) On or about 02/26/2018, finger amputation on saw
Recent events (2)
  • — I (O) $831.5
  • — Z (O) $1663

View Christensen Lumber, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342995636.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.