OSHA Inspection: STYL, INC.

Issued

Apr 9, 2018

Abate by

Jun 4, 2018

Penalty

Initial $3,326 · Current $2,050 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):         29 CFR 1926.602(d): Note: The requirements applicable to construction work under paragraph (d) of this section are identical to those set forth at paragraph (l) of 29 CFR 1910.178.         a) On or about March 23, 2018, the employer engaged in the operation of an all-terrain forklift without ensuring competency to operate the equipment safely, as demonstrated by successful completion of forklift training and evaluation.             In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Apr 9, 2018

Abate by

Apr 13, 2018

Penalty

Initial $3,880 · Current $2,400 Reduced

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):                     a) On or about March 23, 2018, employees were exposed to the hazard of falling approximately 20 feet to the exterior of the building while working from the top plate and deck of the second story without the benefit of fall protection.         b) On or about March 23, 2018, employees were exposed to the hazard of falling approximately 11 feet from a second story to a lower deck while working without the benefit of fall protection.             In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Apr 9, 2018

Abate by

Apr 13, 2018

Penalty

Initial $3,326 · Current $2,050 Reduced

General-duty citation text

29 CFR 1926.1053(b)(4):  Ladder(s) were used for purposes other than the purpose for which they were designed:            a) Second Story Hallway - On or about March 23, 2018, a 10 foot A-Frame stepladder was provided for employee use for access and egress between two points of the building.          In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Apr 9, 2018

Abate by

Apr 13, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step:     a) Second Story Hallway - On or about March 23, 2018, the top step of a 10 foot A-Frame stepladder was used as a step for access and egress between two points of the building.         In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).