TUCKER, GA —
OSHA Inspection: H.B. FULLER, COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of H.B. FULLER, COMPANY in 2333 FULLER WAY, TUCKER, GA 30084 (NAICS 325520). OSHA activity number 343060232.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- H.B. FULLER, COMPANY
- Site address
- 2333 FULLER WAY
- City
- TUCKER
- State
- GA
- ZIP
- 30084
- Mailing
- 2333 FULLER WAY, TUCKER, GA 30084
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 325520
- Employees
- 69
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Apr 27, 2018
- Abate by
- May 23, 2018
- Penalty
- Initial $11,641 · Current $11,641
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about 4/3/2018, in production area at 2333 Fuller Way, Tucker, GA: Where authorized employees were performing maintenance and or service activities such as but not limited to troubleshooting and repairing the mixer six (6) hopper shaker transfer table and repairing the De-Cuffer equipment did not utilize specific written energy control procedures to protect the employees from a amputation, caught-in, or crushing hazard.
Recent events (2)
- — I (S) $11641
- — Z (S) $11641
1910.147 C06 I
- Issued
- Apr 27, 2018
- Abate by
- May 23, 2018
- Penalty
- Initial $8,481 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. On or about 4/3/2018, Mixer six (6) bulk Full Hopper in production area at 2333 Fuller Way, Tucker, GA: The employer did not perform annual periodic inspection on the equipment that the employees were required to perform maintenance, repairs, services, adjustments, and cleaning as part of their job. The last documented periodic inspection of the employer's energy control procedure was 10/4/2013. 1. Mixer 6 Bulk Fill Hopper, Mixer 6 Filler 2. De-Cuffer up and down stair areas 3. Stretch Wrapper 4. Reject, Spiral, Metal Detector Reject, Single Filler, Spiral Return, and Spiral Feed Conveyors 5. Robots 6. Pallet Stacker 7. Metal Detector
Recent events (2)
- — I (S) $0
- — Z (S) $8481
1910.178 L01 II
- Issued
- Apr 27, 2018
- Abate by
- May 23, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a On or about 4/3/2018, at 2333 Fuller Way, Tucker, GA: An employee operating a powered industrial truck to move, lift, load, and unload heavy material was not provided practical training and evaluation of his performance prior to operating the powered industrial truck.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 P01
- Issued
- Apr 27, 2018
- Abate by
- May 23, 2018
- Penalty
- Initial $793 · Current $793
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): On or about 4/3/2018, at 2333 Fuller Way, Tucker, GA: Where an employee operated a powered industrial truck with safety defects and deficiencies such as but not limited to damage and broken fork pin locks used to secure the forks on the lift and mirror for viewing the rear of the lift. The employer failed to remove the powered industrial truck from service until the repairs could be made.
Recent events (2)
- — I (O) $793
- — Z (O) $793
More inspections at H.B. Fuller, Company
View H.B. Fuller, Company's full OSHA safety record →
More inspections in this industry (NAICS 325520)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343060232.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.