OSHA Inspection: BELTLINE BOWL, INC. DBA BEL-AIR BOWL

Issued

Oct 5, 2018

Abate by

Nov 26, 2018

Penalty

Initial $5,174 · Current $3,363 Reduced

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:    The employer did not establish a lockout/tagout program that included employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on the AMF 82-70 Pin-Setting machines, where the unexpected energizing, startup or release of store energy could occur and cause injury, the machines were isolated from all energy courses and rendered inoperative.

Issued

Oct 5, 2018

Abate by

Nov 26, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1) through (d)(6):    The employer failed to implement appropriate energy control application steps for the pinsetter machine, as the gravitational energy of the machine was not isolated prior to employees performing maintenance tasks underneath the pinsetter table (per the 1910.147(d)(2) requirements).  As a result the remaining applicable energy control elements, involving machine isolation [(d)(3)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards.

Issued

Oct 5, 2018

Abate by

Nov 26, 2018

Penalty

Initial $6,467 · Current $4,204 Reduced

General-duty citation text

29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    The employer did not ensure that employees utilizing concentrated corrosive chemicals, such as but not limited to, Defense C, were provided with a suitable eye wash station in the work area.

Issued

Oct 5, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s):  The employer did not ensure that copies of Safety Data Sheets for hazardous chemicals used in the workplace, to include but not limited to, Simple Green Extreme Parts Cleaner, were readily available to employees during their work shift.