CHRISTIANA, PA — 2018-04-11 00:00:00

OSHA Inspection: ALL QUALITY MACHINING & FINISHING, LLC

Complaint inspection · Health discipline

At a glance

On 2018-04-11 00:00:00, OSHA opened a complaint health inspection of ALL QUALITY MACHINING & FINISHING, LLC in 11 GREEN STREET, CHRISTIANA, PA 17509 (NAICS 332323). OSHA activity number 343083457.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch ALL Quality Machining & Finishing, LLC — free Get an email when a new federal OSHA severe-injury report for ALL Quality Machining & Finishing, LLC is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: ALL QUALITY MACHINING & FINISHING, LLC
Site address: 11 GREEN STREET
City: CHRISTIANA
State: PA
ZIP: 17509
Mailing: PO BOX 146128, PHILADELPHIA, PA 19160

What kind of inspection was it?

Inspection type: Complaint (B)
Scope: Partial (B)
Discipline: Health
Advance notice: No
Union status: B

When did the case open and close?

Opened: 2018-04-11 00:00:00
Closing conference: 2018-06-13 00:00:00
Case closed: 2024-04-15 00:00:00
Last modified: 2026-07-21 00:00:00
Data loaded: 2026-07-22 00:20:02

Establishment context

NAICS code: 332323
Employees: 23
Ownership type: A

Citations

21 citations on file for this inspection.

1910.107 B01

Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Mar 25, 2019
Penalty: Initial $7,760 · Current $5,094 Reduced

General-duty citation text

29 CFR 1910.107(b)(1): The spray booth was not substantially constructed of steel, securely and rigidly supported, or of concrete or masonry:    (a) Powder Coating Operation - The two spray booths used for the powder coating operation were not constructed of steel or concrete, on or about April 11, 2018.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $5094
2018-10-15 00:00:00 — C (S) $7760
2018-09-21 00:00:00 — Z (S) $7760

1910.107 B08

Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Mar 25, 2019
Penalty: Initial $7,760 · Current $5,094 Reduced

General-duty citation text

29 CFR 1910.107(b)(8): Each spray booth was not separated from other operations by not less than 3 feet, or by a greater distance, or by a partition or wall as to reduce the danger from juxtaposition of hazardous operations:    (a) Powder Coating Operation - The two Powder Coating Rooms were located immediately adjacent to natural gas oven with the oven door serving as the back wall of the room, on or about April 11, 2018.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $5094
2018-10-15 00:00:00 — C (S) $7760
2018-09-21 00:00:00 — Z (S) $7760

1910.107 B09

Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Mar 25, 2019
Penalty: Initial $0 · Current $0

General-duty citation text

29 CFR 1910.107(b)(9): A clear space of not less than 3 feet on all sides was not kept free from storage or combustible construction:  (a) Powder Coating Operation - The Number One Powder Coating room had wooden shelves with cardboard boxes on one side, cardboard boxes on the top of the room and ladders and cardboard boxes on the other side of the spray room, on or about April 11, 2018.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $0
2018-10-15 00:00:00 — C (S) $0
2018-09-21 00:00:00 — Z (S) $0

1910.107 D07 I

Serious Gravity 10 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Mar 25, 2019
Penalty: Initial $9,054 · Current $6,386 Reduced

General-duty citation text

29 CFR 1910.107(d)(7)(i): Exhaust ducts shall be protected against mechanical damage and have a clearance from unprotected combustible construction or other combustible material of not less than 18 inches.    (a) Powder Coating Operation - The exhaust ducts from the powder coating rooms travelled through interior wooden walls and a sheet of Styrofoam on the exterior wall, the exhaust duct was located on the floor and employees carried boxes over the duct, on or about April 11, 2018.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $6386
2018-10-15 00:00:00 — C (S) $9054
2018-09-21 00:00:00 — Z (S) $9054

1910.107 D09

Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Oct 26, 2018
Penalty: Initial $0 · Current $0

General-duty citation text

29 CFR 1910.107(d)(9): Air exhausted from spray operations was recirculated:  (a) Powder Coating Operation - The air exhausted from the two powder coating spray rooms travelled through the outside Donaldson Torit dust collector and then was recirculated back into the building above the ovens, on or about April 11, 2018.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $0
2018-10-15 00:00:00 — C (S) $0
2018-09-21 00:00:00 — Z (S) $0

1910.107 D11

Deleted Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Mar 25, 2019
Penalty: Initial $0 · Current $0

General-duty citation text

29 CFR 1910.107(d)(11): Air intake openings to rooms containing spray finishing operations were not adequate for the efficient operation of exhaust fans and were not located as to minimize the creation of dead air pockets:  (a) Powder Coating Operation - The two spray rooms used for the powder coating operation were not provided with adequate air intakes to minimize dead pockets in the rooms, on or about April 11, 2018.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $0
2018-10-15 00:00:00 — C (S) $0
2018-09-21 00:00:00 — Z (S) $0

1910.107 L01

Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Mar 25, 2019
Penalty: Initial $7,760 · Current $5,094 Reduced

General-duty citation text

29 CFR 1910.107(l)(1): Electrical equipment and other sources of ignition did not conform to the requirements of paragraphs (c)(1)(i)-(iv), (8) and (9)(i) of this section and subpart S of this part:    (a) Powder Coating Operation - The two spray rooms used for the powder coating operation had receptacles, light switches and junction boxes that were not approved for a Class II location, on or about April 11, 2018.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $5094
2018-10-15 00:00:00 — C (S) $7760
2018-09-21 00:00:00 — Z (S) $7760

1910.107 L02 I

Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Mar 25, 2019
Penalty: Initial $7,760 · Current $5,094 Reduced

General-duty citation text

29 CFR 1910.107(l)(2)(i): All nondeposited air-suspended powders were not safely removed via exhaust ducts to the powder recovery cyclone or receptacle:    (a) Powder Coating Operation - The Donaldson Torit dust collector used to collect the powder from the two powder coating rooms was not equipped with any isolation devices upstream and downstream from the dust collector, on or about April 11, 2018.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $5094
2018-10-15 00:00:00 — C (S) $7760
2018-09-21 00:00:00 — Z (S) $7760

1910.107 L04 I

Deleted Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Mar 25, 2019
Penalty: Initial $7,760 · Current $0 Reduced

General-duty citation text

29 CFR 1910.107(l)(4)(i): All areas were not kept free of the accumulation of powder coating dust:  (a) Powder Coating Operation - Powder coating dust had accumulated on the floors, walls and ductwork at the two powder coating rooms, on or about April 11, 2018.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $0
2018-10-15 00:00:00 — C (S) $7760
2018-09-21 00:00:00 — Z (S) $7760

1910.134 C01

Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Oct 26, 2018
Penalty: Initial $5,174 · Current $2,508 Reduced

Hazardous substances 9135T405

General-duty citation text

29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:    (a) Powder Coating Operation - The employer did not establish a written respiratory protection program for employees wearing tight-fitting full face respirators while applying the powder coating, on or about April 11, 2018.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $2508
2018-10-15 00:00:00 — C (S) $5174
2018-09-21 00:00:00 — Z (S) $5174

1910.134 K03

Deleted Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Oct 26, 2018
Penalty: Initial $0 · Current $0

Hazardous substances 9135T405

General-duty citation text

29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace:    (a) Powder Coating Operation - The employer did not provide respirator training prior to requiring employees to wear a respirator at the powder coating operation, on or about April 11, 2018.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $0
2018-10-15 00:00:00 — C (S) $0
2018-09-21 00:00:00 — Z (S) $0

1910.134 D01 III

Deleted Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Penalty: Initial $6,467 · Current $0 Reduced

Hazardous substances 9135T405

General-duty citation text

29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards and identification of the contaminant's chemical state and physical form:  (a) Powder Coating Operation - The employer did not identify and evaluate employee exposure to 1,3,5 Triglycidyl Isocyanurate (TGIC) and total particulates at the powder coating, on or about April 11, 2018.  No abatement certification or documentation required.

Recent events (3)

2019-01-09 00:00:00 — F (S) $0
2018-10-15 00:00:00 — C (S) $6467
2018-09-21 00:00:00 — Z (S) $6467

1910.1026 D01

Other-than-serious 1 instance 1 exposed

Issued: Sep 21, 2018
Penalty: Initial $0 · Current $0

General-duty citation text

29 CFR 1910.1026(d)(1): The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI    (a) All Quality Machining and Finishing, LLC - The employer did not conduct air monitoring to determine employee exposures to hexavalent chromium while welding on stainless steel, on or about April 11, 2018.     No abatement certification or documentation required.

Recent events (3)

2019-01-09 00:00:00 — F (O) $0
2018-10-15 00:00:00 — C (S) $0
2018-09-21 00:00:00 — Z (S) $0

1910.1052 D01 I

Deleted Serious Gravity 1 1 instance 1 exposed

Issued: Sep 21, 2018
Penalty: Initial $0 · Current $0

Hazardous substances 1730

General-duty citation text

29 CFR 1910.1052(d)(1)(i): Where methylene chloride was present in the workplace, the employer did not determine each employee's exposure:  (a) All Quality Machining and Finishing, LLC - The employer did not conduct air monitoring to determine an employee's exposure to methylene chloride while using Klean Strip which contained 60%-100% methylene chloride, on or about April 11, 2018.  No abatement certification or documentation required.

Recent events (3)

2019-01-09 00:00:00 — F (S) $0
2018-10-15 00:00:00 — C (S) $0
2018-09-21 00:00:00 — Z (S) $0

1910.134 E01

Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Oct 26, 2018
Penalty: Initial $5,174 · Current $2,508 Reduced

Hazardous substances 9135

General-duty citation text

29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:    (a) Powder Coating Operation - The employer did not provide medical evaluations for two employees required to wear full face respirators while applying the powder coating, on or about April 11, 2018.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $2508
2018-10-15 00:00:00 — C (S) $5174
2018-09-21 00:00:00 — Z (S) $5174

1910.134 F02

Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Oct 26, 2018
Penalty: Initial $0 · Current $0

Hazardous substances 9135T405

General-duty citation text

29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:    (a) Powder Coating Operation - Two employees wearing tight-fitting full face respirators while applying the powder coating were not fit tested prior to initial use of the respirators, on or about April 11, 2018.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $0
2018-10-15 00:00:00 — C (S) $0
2018-09-21 00:00:00 — Z (S) $0

1910.134 G01 I A

Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Abate by: Oct 26, 2018
Penalty: Initial $5,174 · Current $2,508 Reduced

Hazardous substances 9135T405

General-duty citation text

29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function:    (a) Powder Coating Operation - Two employees who had facial hair were wearing tight-fitting full face respirators while applying the powder coating, on or about April 11, 2018.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $2508
2018-10-15 00:00:00 — C (S) $5174
2018-09-21 00:00:00 — Z (S) $5174

1910.134 H02 I

Serious Gravity 5 1 instance 2 exposed

Issued: Sep 21, 2018
Penalty: Initial $7,760 · Current $5,094 Reduced

Hazardous substances 9135T405

General-duty citation text

29 CFR 1910.134(h)(2)(i): Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or  were not packed or stored to prevent deformation of the facepiece and exhalation valve:    (a) Powder Coating Operation - Respirators were not protected from contamination and deformation, on or about April 11, 2018.     No abatement certification or documentation required.

Recent events (3)

2019-01-09 00:00:00 — F (S) $5094
2018-10-15 00:00:00 — C (S) $7760
2018-09-21 00:00:00 — Z (S) $7760

1910.1052 H01

Deleted Serious Gravity 5 1 instance 1 exposed

Issued: Sep 21, 2018
Abate by: Oct 11, 2018
Penalty: Initial $7,760 · Current $0 Reduced

Hazardous substances 1730

General-duty citation text

29 CFR 1910.1052(h)(1): Where needed to prevent methylene chloride induced skin or eye irritation, the employer did not provide clean protective clothing and equipment resistant to methylene chloride, at no cost to the employee, and/or did not ensure that each affected employee used it:   a) All Quality Machining and Finishing, LLC - The employer did not provide proper protective gloves resistant to methylene chloride for employees using Klean strip which contained 60-100% methylene chloride, on or about April 11, 2018.   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (S) $0
2018-10-15 00:00:00 — C (S) $7760
2018-09-21 00:00:00 — Z (S) $7760

1910.1052 I02

Serious Gravity 5 1 instance 1 exposed

Issued: Sep 21, 2018
Penalty: Initial $0 · Current $5,094

Hazardous substances 1730

General-duty citation text

29 CFR 1910.1052(i)(2): It was reasonably foreseeable that an employee's eyes may contact solutions containing 0.1 percent or greater methylene chloride and the employer did not provide appropriate eyewash facilities within the immediate work area for emergency use:    (a) All Quality Machining and Finishing, LLC - The employer did not provide an eyewash station in the immediate work area for and employee using Klean Strip which contained 60%-100% methylene chloride, on or about April 11, 2018.    No abatement certification or documentation required.

Recent events (3)

2019-01-09 00:00:00 — F (S) $5094
2018-10-15 00:00:00 — C (S) $0
2018-09-21 00:00:00 — Z (S) $0

1910.134 K06

Other-than-serious 1 instance 5 exposed

Issued: Sep 21, 2018
Abate by: Oct 26, 2018
Penalty: Initial $0 · Current $0

Hazardous substances 9135

General-duty citation text

29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:  (a) Grinding/Sanding Operations - The employer did not provide the basic advisory information on respirators for employees who voluntarily wore 3M disposable dust masks, on or about April 11, 2018.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (3)

2019-01-09 00:00:00 — F (O) $0
2018-10-15 00:00:00 — C (O) $0
2018-09-21 00:00:00 — Z (O) $0

More inspections at ALL Quality Machining & Finishing, LLC

Apr 11, 2018 CHRISTIANA, PA

View ALL Quality Machining & Finishing, LLC's full OSHA safety record →

More inspections in this industry (NAICS 332323)

Jul 14, 2026 American Ironworks Manufacturing, INC. · PACOIMA, CA Jul 8, 2026 Town Gate CO. INC. · PATERSON, NJ Jul 1, 2026 161479 - Trinity Manufacturing Group, LLC · HUDSON, NC Jun 30, 2026 Bil-Jax INC. · ARCHBOLD, OH Jun 29, 2026 Mission Viejo Ornamental Iron, INC. · IRVINE, CA

More inspections in PA

Jul 17, 2026 FOX Tapping INC. · COLUMBIA, PA Jul 17, 2026 Columbia Water CO · COLUMBIA, PA Jul 17, 2026 NEW Enterprise Stone & Lime CO., INC. · WILKES BARRE, PA Jul 16, 2026 Mukhleen Gernaros Pizza LLC DBA Genaro'S Pizzeria and Steaks · PHILADELPHIA, PA Jul 16, 2026 Center City Construction and Development, LLC · PHILADELPHIA, PA

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343083457.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.