APPLETON, WI —
OSHA Inspection: BURG HOMES & DESIGN, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BURG HOMES & DESIGN, INC. in N212 GREEN BAY ROAD, APPLETON, WI 54911 (NAICS 238130). OSHA activity number 343128351.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BURG HOMES & DESIGN, INC.
- Site address
- N212 GREEN BAY ROAD
- City
- APPLETON
- State
- WI
- ZIP
- 54911
- Mailing
- N7912 US HWY 151, FOND DU LAC, WI 54937
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 23
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.20 B02
- Issued
- Jul 17, 2018
- Penalty
- Initial $3,696 · Current $1,250 Reduced
General-duty citation text
29 CFR 1926.20(b)(2): It shall be the responsibility of the employer to initiate and maintain such programs which shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers. On or about May 1, 2018 at N212 Green Bay Road in Appleton, the employer did not ensure that a competent person was performing frequent and regular inspections that could have recognized the fall from elevation hazard associated with an employee working without fall protection from a scaffold plank supported by a forklift and the site structure and with a work surface less than eighteen inches wide.
Recent events (2)
- — I (S) $1250
- — Z (S) $3696
1926.451 B02
- Issued
- Jul 17, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(b)(2): Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and walkway shall be at least 18 inches (46 cm) wide. On or about May 1, 2018 at N212 Green Bay Road in Appleton, an employee was installing roof sheathing from a scaffold plank less than eighteen inches wide at sixteen feet above surface level.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L01 II
- Issued
- Jul 17, 2018
- Penalty
- Initial $3,696 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5) and as referenced by the note contained in 1926.602(d). On May 1, 2018 at N212 Green Bay Road in Appleton, an employee was operating a JCB 535 140 telehandler for elevating materials and an employee sixteen feet above surface level during installation of roof sheathing prior to receiving required operator training.
Recent events (2)
- — I (S) $0
- — Z (S) $3696
1926.451 G01 VII
- Issued
- Jul 17, 2018
- Penalty
- Initial $3,696 · Current $1,250 Reduced
General-duty citation text
29 CFR 1926.451(g)(1)(vii): For all scaffolds not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, each employee shall be protected by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. a) On May 1, 2018 at N212 Green Bay Road in Appleton, an employee was working from a basket scaffold supported by a JCB Telehandler sixteen feet above surface level without utilizing fall protection equipment; basket positioned without full front blocked/protected by roof eave edge and without guardrails installed on one side and on front side. b) On May 1, 2018 at N212 Green Bay Road in Appleton, an employee was working from a scaffold plank to install roofing sheathing at sixteen feet above surface level without utilizing fall protection equipment; plank supported by JCB Telehandler basket work surface and by a board attached to the site structure.
Recent events (2)
- — I (S) $1250
- — Z (S) $3696
1910.178 L04 III
- Issued
- Jul 17, 2018
- Penalty
- Initial $415 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years. On or about May 1, 2018 at N212 Green Bay Road in Appleton, the employer did not ensure an employee had received the required forklift operator's performance evaluation prior to operating a JCB 535 140 telehandler. The employee had been certified in 2014.
Recent events (2)
- — I (O) $0
- — Z (O) $415
More inspections at Burg Homes & Design, INC.
View Burg Homes & Design, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343128351.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.