Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BURG HOMES & DESIGN, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BURG HOMES & DESIGN, INC. in 165 E. RHINE ST., ELKHART LAKE, WI 53020 (NAICS 236115). OSHA activity number 343278073.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Burg Homes & Design, INC. — free Get an email when a new federal OSHA severe-injury report for Burg Homes & Design, INC. is published. One employer, no account, unsubscribe in one click.
Site address
165 E. RHINE ST.
City
ELKHART LAKE
State
WI
ZIP
53020
Mailing
N7912 US HWY 151, FOND DU LAC, WI 54937
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236115
Employees
20
Ownership type
A

3 citations on file for this inspection.

1926.451 G01

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jul 17, 2018
Penalty
Initial $2,956 · Current $0 Reduced
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level.   On July 6, 2018, an employee was exposed to falling from a personnel platform supported by a JCB telehandler when the guardrails had not been put in place to provide fall protection.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2956

1926.501 B01

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Jul 17, 2018
Penalty
Initial $2,956 · Current $0 Reduced
29 CFR 1926.501(b)(1): "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.  On and about July 6, 2018, employees were exposed to falls from the second floor deck to the ground while framing a gable end wall when the guardrail protecting the edge had been removed and no other fall protection was established.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2956

1926.602 D

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jul 17, 2018
Penalty
Initial $4,434 · Current $0 Reduced
29 CFR 1926.602(d): Powered industrial truck operator training.   29 CFR 1910.178(l)(3): Training program content. Powered industrial truck operators shall receive initial training in the following topics, except in topics which the employer can demonstrate are not applicable to safe operation of the truck in the employer's workplace.  29 CFR 1910.178(l)(3)(i)(G): Fork and attachment adaptation, operation, and use limitations;  On and about July 6, 2018, an employee was exposed to falling from a forklift supported personnel platform when the operator had not been trained to understand and follow the applicable standards contained in ANSI B56-6, in that:  A: The operator was moving the lift while it was occupied;  B: The platform was not marked with its weight or capacity.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4434

View Burg Homes & Design, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343278073.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.