JAMESTOWN, NY —
OSHA Inspection: DAWSON METAL COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DAWSON METAL COMPANY, INC. in 825 ALLEN STREET, JAMESTOWN, NY 14701 (NAICS 332322). OSHA activity number 343165858.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DAWSON METAL COMPANY, INC.
- Site address
- 825 ALLEN STREET
- City
- JAMESTOWN
- State
- NY
- ZIP
- 14701
- Mailing
- 825 ALLEN ST., JAMESTOWN, NY 14701
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 91
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.106 E06 II
- Issued
- Jun 19, 2018
- Abate by
- Aug 2, 2018
- Penalty
- Initial $5,174 · Current $0 Reduced
General-duty citation text
29 CFR 1910.106(e)(6)(ii): Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), were dispensed into containers without the nozzle and container being electrically interconnected. a) On or about 05/16/2018, in the paint vault area, when employees dispense lacquer thinner from Metal drums to smaller containers employees did not use bonding wires to electrically interconnect the drums and containers together, exposing them to fire hazards. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $0
- — C (S) $5174
- — Z (S) $5174
1910.147 C04 I
- Issued
- Jun 19, 2018
- Abate by
- Aug 2, 2018
- Penalty
- Initial $5,174 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about 05/16/2018, in the Buffing Area, when employees perform maintenance and servicing activities, such as changing the buffing wheels on the G&P swing frame polisher, energy control procedures were not being utilized, exposing employees to unexpected start of the G&P swing frame polisher. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $2500
- — C (S) $5174
- — Z (S) $5174
1910.147 C07 I A
- Issued
- Jun 19, 2018
- Abate by
- Aug 2, 2018
- Penalty
- Initial $5,174 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation. a) On or about 05/16/2018, in the production area, employees that are required to Lockout machines such as, but not limited to, the G&P swing frame polisher, when performing maintenance or servicing activities such as changing buffing wheel, were not trained as authorized employees. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $2500
- — C (S) $5174
- — Z (S) $5174
1910.212 A01
- Issued
- Jun 19, 2018
- Abate by
- Aug 2, 2018
- Penalty
- Initial $5,174 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about 05/16/2018, in the Drill and Fasten area, employees were exposed to ingoing nip points and rotating parts hazards when operating the Drill Press without proper guarding. ABATEMENT DOCUMENTATION REQUIRED
Recent events (3)
- — J (S) $0
- — C (S) $5174
- — Z (S) $5174
1910.255 B04
- Issued
- Jun 19, 2018
- Abate by
- Aug 2, 2018
- Penalty
- Initial $6,467 · Current $0 Reduced
General-duty citation text
29 CFR 1910.255(b)(4): All press welding machine operations, where there was a possibility of the operator's fingers being under the point of operation, were not effectively guarded by use of a device such as an electronic eye safety circuit, two hand control a) On or about 05/16/2018, in the press break area, employees were exposed to crushing hazards when operating the spot welder (TruAm/TaylorWinfield) without an effective point of operation guard. ABATEMENT DOCUMENTATION REQUIRED
Recent events (3)
- — J (O) $0
- — C (S) $6467
- — Z (S) $6467
1910.1200 G08
- Issued
- Jun 19, 2018
- Abate by
- Aug 2, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain copies of the required safety data sheets for each hazardous chemical in the workplace: a) On or about 05/16/2018, throughout establishment, employer did not maintain copies of the required safety data sheets for each hazardous chemical in the workplace such as but not limited to: Lacquer Thinner, Mobil Vagtra Oil No. 4, AW-46 Hydraulic Oil, Costal Automatic transmission Fluid. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Dawson Metal Company, INC.
View Dawson Metal Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343165858.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.