MACOMB, IL —
OSHA Inspection: NTN BEARING CORPORATION OF AMERICA
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of NTN BEARING CORPORATION OF AMERICA in 711 N BOWER RD, MACOMB, IL 61455 (NAICS 332991). OSHA activity number 343185310.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NTN BEARING CORPORATION OF AMERICA
- Site address
- 711 N BOWER RD
- City
- MACOMB
- State
- IL
- ZIP
- 61455
- Mailing
- 1805 N UNIVERSITY DR, MACOMB, IL 61455
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332991
- Employees
- 888
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.217 C02 I B
- Issued
- Nov 16, 2018
- Abate by
- Jan 10, 2019
- Penalty
- Initial $10,163 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(c)(2)(i)(b): Point of operation guard(s) on mechanical power press(es) did not conform to the maximum permissible Opening(s) specified in Table 10 O-10: Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a. On or about May 22, 2018, employees working in the Press Department were exposed to the hazard of being caught in the point of operation while operating the Minster Press, Machine Number R-05, Model Number 40E-4 1/2, Serial Number 40-4.5E-5640, because the employer had not provided adequate machine guarding. b. On or about May 22, 2018, employees working in the Press Department were exposed to the hazard of being caught in the point of operation while operating the Minster Press, Machine Number R-03, Model Number 40E-4 1/2, Serial Number 6085, because the employer had not provided adequate machine guarding.
Recent events (2)
- — I (S) $0
- — Z (S) $10163
1910.219 F03
- Issued
- Nov 16, 2018
- Abate by
- Jan 10, 2019
- Penalty
- Initial $10,163 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven feet or less above floors or platforms were not enclosed: a. On or about May 22, 2018, employees working in the Press Department were exposed to injury while operating the Minster Press, Machine Number R-09, Model Number 40E-11, Serial Number 40E11-5013, because the sprocket wheels and chains were not guarded. b. On or about May 22, 2018, employees working in the Press Department were exposed to injury while operating the Minster Press, Machine Number R-08, Model Number 40E-9, Serial Number 9208, because the sprocket wheels and chains were not guarded. c. On or about May 22, 2018, employees working in the press Department were exposed to injury while operating the Minster Press, Machine Number R-02, Model Number 60E-4 1/2, Serial Number 60-4.5-2479, because the sprocket wheels and chains were not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $10163
1910.212 A01
- Issued
- Nov 16, 2018
- Abate by
- Jan 10, 2019
- Penalty
- Initial $40,651 · Current $7,391 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. On or about May 22, 2018, employees working in the Press Department were exposed to the hazard of being caught in rotating parts while operating the Minster Press, Machine Number R-09, Model Number 40E-11, Serial Number 40E11-5013, because the employer had not provided adequate machine guarding. b. On or about May 22, 2018, an employee working in the Maintenance Department was exposed to the hazard of being caught in rotating parts while operating the Hardinge Lathe, Model Number HLV-EM, because the employer had not provided adequate machine guarding. THE NTN-BOWER CORPORATION WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.212(a)(1), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1288568, CITATION NUMBER 1, ITEM NUMBER 1 AND WAS AFFIRMED AS A FINAL ORDER ON APRIL 27, 2018, WITH RESPECT TO A WORKPLACE LOCATED AT 711 N BOWER ROAD, MACOMB, ILLINOIS 61455.
Recent events (2)
- — I (O) $7391
- — Z (R) $40651
More inspections at NTN Bearing Corporation of America
View NTN Bearing Corporation of America's full OSHA safety record →
More inspections in this industry (NAICS 332991)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343185310.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.