Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MC PAINTING

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MC PAINTING in 22777 SOBOBA ROAD, SAN JACINTO, CA 92583 (NAICS 238320). OSHA activity number 343191334.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch MC Painting — free Get an email when a new federal OSHA severe-injury report for MC Painting is published. One employer, no account, unsubscribe in one click.
Establishment
MC PAINTING
Site address
22777 SOBOBA ROAD
City
SAN JACINTO
State
CA
ZIP
92583
Mailing
2525 RAMONA DRIVE, VISTA, CA 92084
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238320
Employees
10
Ownership type
A

6 citations on file for this inspection.

1910.134 E01

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 28, 2018
Penalty
Initial $5,087 · Current $3,561 Reduced
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:   Basement Area: Employees(s) performing painting and priming operations were wearing 3M half mask elastomeric respirators without a medical clearance. Employees were exposed to respiratory/irritant hazards.
Recent events (2)
  • — I (S) $3560.9
  • — Z (S) $5087

1910.134 F02

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 28, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:   Basement Area: Employees(s) performing painting and priming operations were wearing 3M half mask elastomeric respirators without being fit tested prior to initial use. Employees were exposed to respiratory/irritant hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 G01 I A

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 28, 2018
Penalty
Initial $3,816 · Current $2,671 Reduced
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function:   Basement Area: Employees(s) with facial hair were permitted to wear a tight-fitting half-mask respirator. Employee(s) were exposed to respiratory irritation due to the facial hair interfering with the face-to-face piece seal.
Recent events (2)
  • — I (S) $2671.2
  • — Z (S) $3816

1910.134 G01 II

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 28, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.134(g)(1)(ii): Corrective glasses, goggles or other personal protective equipment were worn in a manner that interfered with the seal of the respirator facepiece:   Basement Area: Employees(s) wearing a balaclava were permitted to wear a tight-fitting half-mask respirator over it. Employee(s) were exposed to respiratory irritation due to the balaclava interfering with the face-to-face piece seal.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 H01 I

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 28, 2018
Penalty
Initial $3,816 · Current $2,671 Reduced
29 CFR 1910.134(h)(1)(i): Respirators issued for the exclusive use of an employee were not cleaned and disinfected as often as necessary to be maintained in a sanitary condition:    Basement Area: Employees(s) performing painting and priming tasks were using 3M half-mask respirators that had excessive paint inside and outside of the facepiece and on the filter cartridges. Employee(s) were exposed to respiratory irritation due to improper maintenance of the respirators.
Recent events (2)
  • — I (S) $2671.2
  • — Z (S) $3816

1910.134 K01 VII

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 28, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.134(k)(1)(vii): The employer did not ensure that each user could demonstrate knowledge of the general requirements of 29 CFR 1910.134:  (Construction Reference 1926.103)  Basement Area: Employees(s) performing painting and priming tasks did not demonstrate knowledge of the respiratory protection standard. A 3M half-mask respirator was in use at the time of the inspection with the head straps in disrepair. Additionally, employee(s) did not perform a seal check prior to use. Employee(s) were exposed to respiratory irritation due to improper maintenance and use of the respirators.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View MC Painting's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343191334.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.