Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: U.S. DEPARTMENT OF JUSTICE, BUREAU OF PRISONS, F.C.I. MILAN, FEDERAL PRISON INDUSTRIES, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of U.S. DEPARTMENT OF JUSTICE, BUREAU OF PRISONS, F.C.I. MILAN, FEDERAL PRISON INDUSTRIES, INC. in 4004 ARKONA ROAD, MILAN, MI 48160 (NAICS 922140). OSHA activity number 343268967.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch U.S. Department of Justice, Bureau of Prisons, F.C.I. Milan, Federal Prison Industries, INC. — free Get an email when a new federal OSHA severe-injury report for U.S. Department of Justice, Bureau of Prisons, F.C.I. Milan, Federal Prison Industries, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4004 ARKONA ROAD
City
MILAN
State
MI
ZIP
48160
Mailing
P.O. BOX 9999, MILAN, MI 48160
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
Yes
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
922140
Employees
262
Ownership type
D

7 citations on file for this inspection.

1910.107 B05 I

Serious Gravity 5 1 instance 8 exposed
Issued
Oct 19, 2018
Abate by
Oct 31, 2018
Penalty
Initial $0 · Current $0

Hazardous substances 05279135

29 CFR 1910.107(b)(5)(i):  Electrostatic spraying operations were conducted when the average air velocity over the open face of the booth was less than 60 linear feet per minute.    On or about August 20, 2018, in Paint B, during powder coating operations using Nordson Excel 2000 Powder Systems Model 2003H, serial number 81-098-190, the average air velocity over the open face of the employee alcove on the right side was 53.78 linear feet per minute.
Recent events (1)
  • — Z (S) $0

1910.133 A01

Serious Gravity 1 1 instance 2 exposed
Issued
Oct 19, 2018
Abate by
Oct 31, 2018
Penalty
Initial $0 · Current $0

Hazardous substances 9135

29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee used appropriate protective eye equipment when exposed to eye hazards where there was a reasonable probability of injury that could be prevented by such equipment.  On or about August 21, 2018, in Paint B, the employer did not require painters to use chemical splash goggles when working inside the Nordson Excel 2000 Powder Coating System during spraying and cleaning activities. Employees were exposed to eye hazards from flying particles that could result in eye irritation, redness and swelling.
Recent events (1)
  • — Z (S) $0

1910.134 H02 I

Serious Gravity 5 1 instance 15 exposed
Issued
Oct 19, 2018
Penalty
Initial $0 · Current $0

Hazardous substances 05279135

29 CFR 1910.134(h)(2)(i): Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or  were not packed or stored to prevent deformation of the facepiece and exhalation valve:  On or about August 21, 2018, the employer did not ensure that respirators were stored to protect them from damage, contamination and dust in that respirators were stored in metal boxes without protective coverings. Employees were required to wear respirators during activities such as, but not limited to spraying powder coating and cleaning the spray booth.
Recent events (1)
  • — Z (S) $0

1910.1000 A02

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 19, 2018
Abate by
Nov 15, 2018
Penalty
Initial $0 · Current $0

Hazardous substances 9135

29 CFR 1910.1000(a)(2): Employee(s) were exposed to an airborne concentration of Particulates Not Otherwise Regulated (Total Dust) listed in Table Z-1 in excess of the 8 hour Time Weighted Average concentration of 15 mg per cubic meter:   On or about August 21, 2018, in paint booth B, an employee during powder coating and booth monitoring activities was exposed to Particulates Not Otherwise Regulated (Total Dust) concentrations at an eight-hour time weighted average of 60.74 mg per cubic meter of air which exceeded the OSHA PEL of 15 mg per cubic meter of air.
Recent events (1)
  • — Z (S) $0

1910.1000 E

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 19, 2018
Abate by
Mar 7, 2019
Penalty
Initial $0 · Current $0

Hazardous substances 9135

29 CFR 1910.1000(e): Feasible administrative or engineering controls were not determined and implemented to achieve compliance with the limits prescribed in 29 CFR 1910.1000(a) through (d):  On or about August 21, 2018, in paint booth B, the employer did not implement feasible administrative or engineering controls to achieve compliance with the Particulates Not Otherwise Regulated -Total Dust 8-hour time weighted average limit of 15mg per cubic meter of air for employees involved in powder coating and booth monitoring activities.
Recent events (1)
  • — Z (S) $0

1910.1200 G01

Other-than-serious 1 instance 8 exposed
Issued
Oct 19, 2018
Penalty
Initial $0 · Current $0

Hazardous substances 050505279135

29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use:  On or about July 2, 2018, the employer did not maintain a safety data sheet for Sherwin-Williams POWDURA Hybrid Powder Coating- PNT1101D Black which is used during powder coating processes.
Recent events (1)
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 8 exposed
Issued
Oct 19, 2018
Penalty
Initial $0 · Current $0

Hazardous substances 050505279135

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  On or about July 2, 2018, the employer did not provide effective training on hazardous chemicals such as, but not limited calcium carbonate and carbon black, which are included in Sherwin-Williams POWDURA Hybrid Powder Coating- PNT1101D Black and used by paint department employees when coating metal parts. Employees were exposed to inhalation, skin and eye contact hazards that could result in health effects such as, but not limited to eye, skin and respiratory irritation.
Recent events (1)
  • — Z (O) $0

View U.S. Department of Justice, Bureau of Prisons, F.C.I. Milan, Federal Prison Industries, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343268967.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.