BELLWOOD, IL —
OSHA Inspection: ADVANCED TECHNOLOGY SERVICES, INC. DBA ATS
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ADVANCED TECHNOLOGY SERVICES, INC. DBA ATS in 700 25TH AVE, BELLWOOD, IL 60104 (NAICS 811310). OSHA activity number 343300935.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ADVANCED TECHNOLOGY SERVICES, INC. DBA ATS
- Site address
- 700 25TH AVE
- City
- BELLWOOD
- State
- IL
- ZIP
- 60104
- Mailing
- 8201 N. UNIVERSITY STREET, PEORIA, IL 61615
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811310
- Employees
- 58
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 D
- Issued
- Dec 28, 2018
- Abate by
- Jan 25, 2019
- Penalty
- Initial $12,934 · Current $6,400 Reduced
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a) Courtyard Area- On or about July 5, 2018, employees were exposed to machine hazards associated with moving parts and pinch point hazards during the maintenance and servicing of the Glue and Roll Coat Lines Oxidizer 1097. The employer failed to implement energy control application steps as lockout tagout (LOTO) devices were not applied to the electrical disconnect, gas supply valve, and three pneumatic valves [per the 1910.147(d)(4) requirements. As a result, the remaining applicable energy control elements, involving dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $6400
- — Z (S) $12934
1910.147 F03 I
- Issued
- Dec 28, 2018
- Abate by
- Jan 25, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(f)(3)(i): A procedure was not utilized to afford the employees a level of protection equivalent to that provided by the implementation of a personal lockout or tagout device when servicing and/or maintenance was performed by a crew, craft, or group: a) Courtyard Area- On or about July 5, 2018, the employer did not ensure that employees utilized a lockout procedure that provided employees a level of protection equivalent to that provided by the implementation of a personal lockout device to protect them from the unexpected energization of the equipment when work was performed by a group on the Glue and Roll Coat Lines Oxidizer 1097. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 F02 I
- Issued
- Dec 28, 2018
- Abate by
- Jan 25, 2019
- Penalty
- Initial $10,163 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(f)(2)(i): When outside servicing personnel were engaged in activities in a facility, the onsite employer and the outside employer did not inform each other of their respective lockout or tagout procedures: a) Courtyard Area- On or about July 5, 2018, the employer and the outside servicing personnel of Catalytic Products International, Inc. as well as BorgWarner Transmission Systems LLC, did not inform one another of their lockout tagout procedures. All three companies had procedures, but none of the three were utilized and it contributed to confusion among employees of the responsibilities with the application of lockout on the Glue and Roll Coat Lines Oxidizer 1097. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $10163
1904.40 A
- Issued
- Dec 28, 2018
- Penalty
- Initial $2,033 · Current $0 Reduced
General-duty citation text
29 CFR 1904.40(a): The employer did not provide an authorized government representative the records within the four business hours. a) 700 25th Ave.- On July 13, 2018, the employer failed to provide the requested OSHA 300 logs or an equivalent form within four business hours of their request for the year 2018. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $2033
More inspections at Advanced Technology Services, INC. DBA ATS
View Advanced Technology Services, INC. DBA ATS's full OSHA safety record →
More inspections in this industry (NAICS 811310)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343300935.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.