HENDERSON, CO —
OSHA Inspection: Y & T LAYOUT
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of Y & T LAYOUT in 11250 FLORENCE ST, HENDERSON, CO 80640 (NAICS 238130). OSHA activity number 343350195.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- Y & T LAYOUT
- Site address
- 11250 FLORENCE ST
- City
- HENDERSON
- State
- CO
- ZIP
- 80640
- Mailing
- 15021 JOSEPHINE STREET, THORNTON, CO 80602
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 7
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.102 A01
- Issued
- Aug 13, 2018
- Abate by
- Sep 7, 2018
- Penalty
- Initial $2,217 · Current $1,300 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation. Y & T Layout located at 4682 Hahns Peak Drive, Loveland, CO 80534: On and preceding 1 August 2018, the employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles to include but not limited to debris from use of pneumatic nail guns. Employees installing trusses with a pneumatic nail gun on a residential roof were not utilizing eye or face protection. This exposed the employees to struck by hazards.
Recent events (2)
- — I (S) $1300
- — Z (S) $2217
1926.501 B13
- Issued
- Aug 13, 2018
- Abate by
- Sep 7, 2018
- Penalty
- Initial $2,217 · Current $1,300 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) Y & T Layout located at 4682 Hahns Peak Drive, Loveland, CO 80534: On and preceding 1 August 2018, The employer did not ensure that employees engaged in residential framing activities 6 feet or more above lower levels were protected by guardrail systems, safety net systems, or personal fall arrest systems. Two employees were installing trusses on a three story residential building without the personal fall arrest system lanyard connected to their harnesses while they were actively engaged in framing work. The exposed employees to falls from height.
Recent events (2)
- — I (S) $1300
- — Z (S) $2217
1926.502 D06 I
- Issued
- Aug 13, 2018
- Abate by
- Sep 7, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.502(d)(6)(i): Snap hooks were connected directly to webbing, rope or wire rope: Y & T Layout located at 4682 Hahns Peak Drive, Loveland, CO 80534: On and preceding 1 August 2018, the employer did not ensure that snap hooks were not connected directly to rope used for anchorage of a rope grab fall protection system. Framers were engaged in residential framing activities 6 feet or more above lower levels and the personal fall arrest system snap hook was attached directly to the ropes on all four setups. Four employees were installing trusses on a three story residential building while using these rope grabs and ropes. The exposed employees to falls from height.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.503 A01
- Issued
- Aug 13, 2018
- Abate by
- Sep 7, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: Y & T Layout located at 4682 Hahns Peak Drive, Loveland, CO 80534: On and preceding 1 August 2018, the employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize the hazards. Framers were engaged in residential framing activities 6 feet or more above lower levels and the personal fall arrest system snap hook was attached directly to the ropes on all four setups. Four employees were installing trusses on a three story residential building while using these rope grabs and ropes. Additionally, all four of the ropes and lanyards were connected at or below foot level of the framers. The exposed employees to falls from height.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1053 B01
- Issued
- Aug 13, 2018
- Abate by
- Sep 7, 2018
- Penalty
- Initial $1,663 · Current $600 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access: Y & T Layout located at 4682 Hahns Peak Drive, Loveland, CO 80534: On and preceding 1 August 2018, The employer did not ensure that ladders used for access to an upper landing surface extended at least 3 feet above the upper landing surface to which the ladder was used to gain access. Four employees were installing trusses on a three story residential building which they used an 8' A-frame ladder to access the upper landing which was 9' or more. The exposed employees to falls from height.
Recent events (2)
- — I (S) $600
- — Z (S) $1663
1926.95 A
- Issued
- Aug 13, 2018
- Abate by
- Sep 7, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.95(a): Personal protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, was not provided. Y & T Layout located at 4682 Hahns Peak Drive, Loveland, CO 80534: On and preceding 1 August 2018, the employer did not ensure that personal protective equipment was provided to framer who were engaged in activities which require the use of eye and head protection. Four employees were installing trusses on a three story residential building which they used pneumatic nail gun and worked at different levels which increased the risk of struck-by hazards. The employer did not provide personal protective equipment to the employees. The employer required the employees to provide their own eye and head protection.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Y & T Layout
View Y & T Layout's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343350195.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.