OSHA Inspection: U.S. CUSTOMS AND BORDER PROTECTION

Issued

Sep 28, 2018

Abate by

Oct 11, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.159(c)(10): The minimum vertical clearance of 18 inches between automatic sprinkler systems sprinklers and the material below was not maintained:  The minimum vertical clearance between the automatic sprinkler system and the material below was not maintained. Employees stacked boxes of materials on metal shelving in a matter which did not allow for 18 inch clearance.  a) Room 1022 - Materials were stored approximately 9 inches from sprinkler heads.  b) Room 1066 - Cardboard boxes were stored approximately 9 inches from sprinkler heads.  c) Room 1068 - Printer Cartridges stored approximately 6 inches from sprinkler heads.  d) Room 1108 - Flammable containers and boxes stored approximately 3 inches from sprinkler heads.

Issued

Sep 28, 2018

Abate by

Oct 4, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator:  Shop - The Delta Radial Arm saw did not return gently to the starting position when released by the operator.

Issued

Sep 28, 2018

Abate by

Oct 4, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  Garage - A Balder double wheeled bench grinder had measured gaps of 1" on the left side between the tongue guard and the abrasive wheel.

Issued

Sep 28, 2018

Abate by

Oct 11, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields:  Welding Shop - Employees who walked and worked in areas adjacent to welding operations, were not protected from ultraviolet radiation by welding screens or shields or by wearing appropriate goggles.

Issued

Sep 28, 2018

Abate by

Oct 11, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet:   Welding Shop Outside - Welding gases Oxygen and Acetylene were stored within a distance of approximately 6-feet from each other.

Issued

Sep 28, 2018

Abate by

Oct 4, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  Room 1121 - A "UL" listed relocatable power tap (RPT) was not used in accordance with instructions to power a 3.5 cubic foot refrigerator.