NILES, OH —
OSHA Inspection: ARCONIC INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ARCONIC INC. in 1000 WARREN AVENUE, NILES, OH 44446 (NAICS 332111). OSHA activity number 343359527.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ARCONIC INC.
- Site address
- 1000 WARREN AVENUE
- City
- NILES
- State
- OH
- ZIP
- 44446
- Mailing
- 1000 WARREN AVENUE, NILES, OH 44446
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332111
- Employees
- 734
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.147 C04 I
- Issued
- Nov 19, 2018
- Penalty
- Initial $9,423 · Current $9,423
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section: On or about August 01, 2018, written procedures for the control of hazardous energies were not developed, documented or utilized used by employees tasked with completing service and maintenance activities of the company's (TiAl) weigh blend system, located in the ARS department at the facility. Energy sources used for the press line, include; but are not limited to, electricity and pneumatic energies.
Recent events (2)
- — I (O) $9423
- — Z (S) $9423
1910.147 D01
- Issued
- Nov 19, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On or about August 01, 2018 an employee tasked completing servicing and/or maintenance activities such as; but not limited to, removing the build up of product from the sensor of the conveyor unit that was apart of the TiAl weigh blend system was exposed to struck by hazards from unexpected start up and energizing of the machinery. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3), LOTO device application [(d)(4), dissipation of residual energy [(d)(5)(I)], and verification of isolation [(d)(6), were not implemented to protect employees from machine servicing hazards. Prepare for shutdown [(d)(1)] - ensure authorized employee has knowledge of the type, magnitude, the hazards, and the method or means to control the energy; Shutdown the machine or equipment [(d)(2)]; Machine isolation [(d)(3)] - Physically locate and operate all energy isolation devices that are needed to control the energy to the machine or equipment in such a manner as to isolate the machine or equipment from the energy source(s); LOTO device application [(d)(4)] - Affix a lockout or tagout device to each energy isolating device; Dissipation of residual energy [(d)(5)(i)] - relieve, disconnect, restrain, and otherwise render safe all potentially hazardous stored or residual energy; Verification of isolation [(d)(6)] - Verify that isolation and deenergization of the machine or equipment has been accomplished
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections at Arconic INC.
View Arconic INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332111)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343359527.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.