OSHA Inspection: M.J.D. CONSTRUCTION, INC.

Issued

Jan 10, 2019

Abate by

Mar 4, 2019

Penalty

Initial $311 · Current $311

General-duty citation text

29 CFR 1903.19(c)(1):  The employer failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:    MJD Construction, Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:    Citation Number                     Item Number                           Abatement Date             1                                           1                                            10/29/2018             1                                           2                                             10/15/2018     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Jan 10, 2019

Abate by

Mar 4, 2019

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.     MJD Construction, Inc., failed to submit documents to OSHA verifying that each of the following cited violations had been corrected:     Citation Number                     Item Number                           Abatement Date             2                                            1                                            10/15/2018     In accordance with 29 CFR 1903.19(d), abatement documentation is required for this violation.

Issued

Sep 28, 2018

Abate by

Oct 29, 2018

Penalty

Initial $2,439 · Current $2,439

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:   On or about August 14, 2018, employees performing residential roofing operations at heights were not trained to recognize or minimize the hazards associated with a fall, exposing employees to a fall.   Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).

Issued

Sep 28, 2018

Abate by

Oct 15, 2018

Penalty

Initial $2,439 · Current $2,439

General-duty citation text

29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:  On or about August 14, 2018, employees accessed a roof from a ladder that did not extend three feet past the roof eve, exposing employees to a fall.  Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).

Issued

Sep 28, 2018

Abate by

Oct 15, 2018

Penalty

Initial $7,317 · Current $7,317

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):    On or about August 14, 2018, employees performing residential roofing operations were not protected from a fall, exposing the employee to a fall of approximately 8.7 feet.   M.J.D. Construction, Inc.  was previously cited for a violation of this Occupational Safety and Health Standard 1926.501(b)(13), which was contained in OSHA inspection number 1314647, citation number 1, item number 3 and was affirmed as a final order on July 5, 2018, with respect to a workplace located at 2312 Robincrest Glenview, IL 60025.   Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).