MAYS LANDING, NJ —
OSHA Inspection: INTEX MILLWORK SOLUTIONS, LLC
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of INTEX MILLWORK SOLUTIONS, LLC in 45 MILL STREET, MAYS LANDING, NJ 08330 (NAICS 326199). OSHA activity number 343443453.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INTEX MILLWORK SOLUTIONS, LLC
- Site address
- 45 MILL STREET
- City
- MAYS LANDING
- State
- NJ
- ZIP
- 08330
- Mailing
- 45 MILL STREET, MAYS LANDING, NJ 08330
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 70
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C05 I
- Issued
- Jan 22, 2019
- Abate by
- Mar 15, 2019
- Penalty
- Initial $9,054 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources. a) Production Area: Mold machine operator employees required to clear jams and clean out the machine on the Weinig Gruppe Powermat 500 molding machine were not provided lock and tags, on or about 8/13/18. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $4000
- — Z (S) $9054
1910.147 C04 I
- Issued
- Jan 22, 2019
- Abate by
- Mar 15, 2019
- Penalty
- Initial $45,269 · Current $56,000
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. a) Production Area: Procedures were not utilized for employees who performed tasks requiring lockout including but limited to clearing jams and cleaning the machine on the Weinig Gruppe Powermat 500 moulding machine, on or about 8/13/18. Intex Millwork Solutions, LLC. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 147(c)(4)(i), which was contained in OSHA inspection number 960048, citation number 1, item number 5a, and was affirmed as a final order on 9/4/14, with respect to a workplace located at 20 Bogden Blvd., Millville, NJ 08332. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (R) $56000
- — Z (R) $45269
1910.147 C07 I A
- Issued
- Jan 22, 2019
- Abate by
- Mar 15, 2019
- Penalty
- Initial $45,269 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation. a) Production Area: Mold machine operator employees required to clear jams and clean out the machine on the Weinig Gruppe Powermat 500 molding machine were not provided lock out tag out training, on or about 8/13/18. Intex Millwork Solutions, LLC. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 147(c)(7)(i)(A), which was contained in OSHA inspection number 960048, citation number 1, item number 5b, and was affirmed as a final order on 9/4/14, with respect to a workplace located at 20 Bogden Blvd., Millville, NJ 08332. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (R) $0
- — Z (R) $45269
More inspections at Intex Millwork Solutions, LLC
View Intex Millwork Solutions, LLC's full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343443453.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.