OSHA Inspection: CONSOLIDATED MACHINE & WELDING

Issued

Sep 18, 2018

Abate by

Feb 5, 2019

Penalty

Initial $8,315 · Current $4,989 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    At 5 Industrial Loop Drive, Hannibal, MO, on 09/11/18, specifically inside of the Press Brake Area, specific lockout/tagout procedures were not developed for the following press brakes:     a/ Accurpress Press Brake, m/n 740012, s/n 4990.    b/ Omada Press Brake, m/n HFEM22204.    c/ Omada Press Brake, m/n RG-100.    d/ Omada Press Brake, m/n RG-50 MLA6116A, s/n 50508405.    e/ Baykal Fab-Line Press Brake, m/n APHS 31090, s/n 22506.    f/ Baykal Fab-Line Press Brake, m/n 37160, s/n 24253.    g/ Omada Press Brake, m/n HG1003.

Issued

Sep 18, 2018

Abate by

Feb 5, 2019

Penalty

Initial $8,315 · Current $4,989 Reduced

General-duty citation text

29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources:    At 5 Industrial Loop Drive, Hannibal, MO, on 09/11/18, specifically inside of the Press Brake Area, authorized employees were not provided with lockout devices for the purpose of isolating electrical, gravity, and hydraulic energy sources for the following machines:    a/ Accurpress Press Brake, m/n 740012, s/n 4990.    b/ Omada Press Brake, m/n HFEM22204.    c/ Omada Press Brake, m/n RG-100.    d/ Omada Press Brake, m/n RG-50 MLA6116A, s/n 50508405.    e/ Baykal Fab-Line Press Brake, m/n APHS 31090, s/n 22506.    f/ Baykal Fab-Line Press Brake, m/n 37160, s/n 24253.    g/ Omada Press Brake, m/n HG1003.

Issued

Sep 18, 2018

Abate by

Feb 5, 2019

Penalty

Initial $8,315 · Current $4,989 Reduced

General-duty citation text

29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation:    At 5 Industrial Loop Drive, Hannibal, MO, authorized employees were not instructed to totally isolate multiple or single energy sourced machines prior to servicing or maintenance.

Issued

Sep 18, 2018

Abate by

Feb 5, 2019

Penalty

Initial $8,315 · Current $4,989 Reduced

General-duty citation text

29 CFR 1910.147(d)(2): The machine or equipment was not turned off or shut down using the procedures established for the machine or equipment:    At 5 Industrial Loop Drive, Hannibal, MO, specifically inside of the Press Brake Area, two employees were about to replace the band saw blade belonging to the Hyd-Mech Horizontal Saw, m/n MEP, s/n DM-10.  The employee(s) pushed the stop button only.  This violation was observed on 09/11/18.

Issued

Sep 18, 2018

Abate by

Feb 5, 2019

Penalty

Initial $8,315 · Current $4,989 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    At 5 Industrial Loop Drive, Hannibal, MO, on 09/11/18, specifically inside of the Press Brake Area, the following machines were inadequately guarded:    a/  Hyd-Mech Horizontal Saw, m/n MEP, s/n DM-10.    b/  Porter Cable Horizontal Sanding Machine.

Issued

Sep 18, 2018

Abate by

Feb 5, 2019

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):    At 5 Industrial Loop Drive, Hannibal, MO, on 09/11/18, specifically inside of the Press Brake Area, the point-of-operation belonging to the following press brakes was unguarded:     a/ Accurpress Press Brake, m/n 740012, s/n 4990.    b/ Omada Press Brake, m/n HFEM22204.    c/ Omada Press Brake, m/n RG-100.    d/ Omada Press Brake, m/n RG-50 MLA6116A, s/n 50508405.    e/ Baykal Fab-Line Press Brake, m/n APHS 31090, s/n 22506.    f/  Baykal Fab-Line Press Brake, m/n 37160, s/n 24253.    g/ Omada Press Brake, m/n HG1003.

Issued

Sep 18, 2018

Abate by

Feb 5, 2019

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:    At 5 Industrial Loop Drive, Hannibal, MO, specifically inside of the Press Brake Area, the Porter Cable Dual Abrasive Wheel Grinder, m/n 0418, s/n 052504, was not anchored to the floor.  This violation was noted on 09/11/18.