Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CASTILLO CONSTRUCTION

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of CASTILLO CONSTRUCTION in 2325 DEL RIO, EAGLE PASS, TX 78852 (NAICS 238170). OSHA activity number 343454401.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Castillo Construction — free Get an email when a new federal OSHA severe-injury report for Castillo Construction is published. One employer, no account, unsubscribe in one click.
Site address
2325 DEL RIO
City
EAGLE PASS
State
TX
ZIP
78852
Mailing
779 N. COMAL, EAGLE PASS, TX 78852
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238170
Employees
3
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 2, 2018
Penalty
Initial $2,217 · Current $1,330 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to an ejection and crushing hazard:    East end of bay:  On or about September 7, 2018 an employee was exposed to an ejection and crushing hazard, while operating a Clark Forklift, Model # GCS 15, while not utilizing/wearing the required seatbelt.
Recent events (2)
  • — I (S) $1330.2
  • — Z (S) $2217

1926.602 D

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 2, 2018
Abate by
Nov 8, 2018
Penalty
Initial $2,217 · Current $1,330 Reduced
29 CFR 1926.602(d): The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l): Note: The requirements applicable to construction work under paragraph (d) of this section are identical to those set forth at paragraph (l) of 29 CFR 1910.178.   29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): AND AS REFERENCED BY THE NOTE CONTAINED IN 1926.602(d)  East End of the building:  On or about September 07, 2018, an employee was exposed to an ejection hazard while operating a Clark Forklift, Model GCS 15, without the operator being trained and certified.
Recent events (2)
  • — I (S) $1330.2
  • — Z (S) $2217

1926.1053 B04

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 2, 2018
Penalty
Initial $2,217 · Current $1,330 Reduced
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed:  At the site, east end of the automatic car wash:  On or about August 27, 2018, an employee was exposed to a fall hazard while using a Husky 12 foot "A" frame stepladder while the ladder was in the closed position and leaned against the interior wall of the automatic car wash bay.  The employee was installing a metal roll door he was using the ladder to access the mounting bracket for the door.
Recent events (2)
  • — I (S) $1330.2
  • — Z (S) $2217

1926.1053 B13

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 2, 2018
Penalty
Initial $0 · Current $0
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step:  At the site, east end of the automatic car wash:  On or about August 27, 2018, an employee was exposed to a fall hazard while using a Louisville 8 foot "A" frame stepladder while standing on the top step.  The employee was installing a metal roll door he was using the ladder to access the mounting bracket for the door.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Castillo Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343454401.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.