MEDFORD, NJ —
OSHA Inspection: BALTYK CONSTRUCTION CO
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of BALTYK CONSTRUCTION CO in 200 TUCKERTON RD, MEDFORD, NJ 08055 (NAICS 238160). OSHA activity number 343518106.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BALTYK CONSTRUCTION CO
- Site address
- 200 TUCKERTON RD
- City
- MEDFORD
- State
- NJ
- ZIP
- 08055
- Mailing
- 1505 CHESTER PIKE UNIT 2 OR UNIT 1C, FOLCROFT, PA 19032
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 10
- Ownership type
- A
Citations
2 citations on file for this inspection.
1926.501 B01
- Issued
- Nov 13, 2018
- Abate by
- Dec 14, 2018
- Penalty
- Initial $3,880 · Current $2,250 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface having an unprotected side or edge which was six or more feet (1.8m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: a) Vicinity of the True Value Hardware and Breakthru stores, overhang for walkway: Employee without fall protection was exposed to an approximate 10 foot fall several times while installing a standing seam metal roof, between approximately 10/01/2018 through 10/11/2018. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $2250
- — Z (S) $3880
1926.1053 B01
- Issued
- Nov 13, 2018
- Abate by
- Dec 14, 2018
- Penalty
- Initial $3,880 · Current $2,250 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Where (a) portable ladder(s) was/were used for access to an upper level landing surface and the ladder's length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigid support that will not deflect, and/or a grasping device was not provided to assist employees in mounting and dismounting the ladder: a) Vicinity of True Value Hardware, Village of Taunton Forge: The side rails of the base section of a Werner Model D1216-2 Type II Medium Duty Aluminum Extension ladder used by an employee to get on to and off of the roof overhang, approximately 10 feet 2 inches above the concrete sidewalk, only extended approximately 4-8 inches above the upper landing surface being access, on or about 10/01/2018; b) Vicinity of True Value Hardware, Village of Taunton Forge: The side rails of the base section of a Werner Model D1216-2 Type II Medium Duty Aluminum Extension ladder used by an employee to get on to and off of the roof overhang, approximately 10 feet 2 inches above the concrete sidewalk, did not extend above the upper landing surface being access, on or about 10/02/2018; c) Vicinity of True Value Hardware, Village of Taunton Forge: The side rails of the base section of a Werner Model D1216-2 Type II Medium Duty Aluminum Extension ladder used by an employee to get on to and off of the roof overhang, approximately 10 feet 2 inches above the concrete sidewalk, only extended approximately 20 inches above the upper landing surface being access, on or about 10/02/2018; d) Vicinity of True Value Hardware & Breakthru Physical Therapy, Village of Taunton Forge: The side rails of the base section of a Werner Model D1216-2 Type II Medium Duty Aluminum Extension ladder used by employees to get on to and off of the roof overhang, approximately 10 feet 2 inches above the concrete sidewalk, only extended approximately 20 inches above the upper landing surface being access, on or about 10/04/2018. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $2250
- — Z (S) $3880
More inspections at Baltyk Construction CO
View Baltyk Construction CO's full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343518106.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.