Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MONAHAN FILAMENTS, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of MONAHAN FILAMENTS, LLC in 215 EGYPTIAN TRAIL, ARCOLA, IL 61910 (NAICS 326199). OSHA activity number 343520680.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Monahan Filaments, LLC — free Get an email when a new federal OSHA severe-injury report for Monahan Filaments, LLC is published. One employer, no account, unsubscribe in one click.
Site address
215 EGYPTIAN TRAIL
City
ARCOLA
State
IL
ZIP
61910
Mailing
ATTN: CHUCK CAMPBELL P.O. BOX 250, ARCOLA, IL 61910
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326199
Employees
75
Ownership type
A

3 citations on file for this inspection.

1910.147 C07 I A

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 28, 2019
Abate by
Apr 19, 2019
Penalty
Initial $9,282 · Current $5,350 Reduced
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control:       On or about October 7, 2018, an employee was exposed to physical injury, while performing the setup operation of stringing line at Roll Stand #2 on Line 1, and the employer did not provide the employee with authorized employee lockout training.  This training would include:   a.         Recognition of applicable hazardous energy sources,   b.         Type and magnitude of the energy available in the workplace,  c.         Methods and means necessary for energy isolation and control.
Recent events (2)
  • — I (S) $5350
  • — Z (S) $9282

1910.147 D

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 28, 2019
Abate by
Apr 19, 2019
Penalty
Initial $9,282 · Current $5,350 Reduced
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedure) was not done in sequence as required by 29 CFR 1910.147(d)(1) through (d)(6):    On or about October 7, 2018, an employee was exposed to physical injury, while performing the setup operation of stringing line at Roll Stand #2 on Line 1. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements].  As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards.
Recent events (2)
  • — I (S) $5350
  • — Z (S) $9282

1910.212 A01

Serious Gravity 10 6 instances 5 exposed
Issued
Jan 28, 2019
Abate by
Apr 19, 2019
Penalty
Initial $9,282 · Current $5,350 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    On or about October 9, 2018, and November 2, 2018, employees were exposed to unguarded rotating/moving parts and ingoing nip points on pieces of equipment including but not limited to the following:       a. Line 3, Ingoing rollers at extruder   b. Line 3, Wheel Station,    c. Line 2, Wheel Station,     d. Line 2, Collection Wheels,    e. Line 1, Collection Wheels, and
Recent events (2)
  • — I (S) $5350
  • — Z (S) $9282

View Monahan Filaments, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343520680.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.