ARCOLA, IL —
OSHA Inspection: MONAHAN FILAMENTS, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MONAHAN FILAMENTS, LLC in 215 EGYPTIAN TRAIL, ARCOLA, IL 61910 (NAICS 326199). OSHA activity number 344355425.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MONAHAN FILAMENTS, LLC
- Site address
- 215 EGYPTIAN TRAIL
- City
- ARCOLA
- State
- IL
- ZIP
- 61910
- Mailing
- ATTN: CHUCK CAMPBELL P.O. BOX 250, ARCOLA, IL 61910
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 82
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 D
- Issued
- Mar 13, 2020
- Abate by
- Mar 24, 2020
- Penalty
- Initial $118,745 · Current $81,500 Reduced
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On or about September 20, 2019, an employee was exposed to physical injury, while performing the setup operation of stringing line at the roll stand on Line 7. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards.
Recent events (3)
- — F (W) $81500
- — C (W) $118745
- — Z (W) $118745
1910.212 A01
- Issued
- Mar 13, 2020
- Abate by
- Mar 24, 2020
- Penalty
- Initial $118,745 · Current $81,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. On or about October 1, 2019, Production Line #1, employees were exposed to unguarded rotating/moving parts and ingoing nip points at the collection wheels. b. On or about October 1, 2019, Production Line #2, employees were exposed to unguarded rotating/moving parts and ingoing nip points at the roll stands. c. On or about October 7, 2019, Production Line #2, employees were exposed to unguarded rotating/moving parts and ingoing nip points at the wrapper. d. On or about October 7, 2019, Production Line #2, employees were exposed to unguarded rotating/moving parts and ingoing nip points at the collection wheels. e. On or about November 25, 2019, Production Line #2, employees were exposed to unguarded rotating/moving parts and ingoing nip points at the collection wheels.
Recent events (3)
- — F (W) $81500
- — C (W) $118745
- — Z (W) $118745
1910.147 C07 I A
- Issued
- Mar 13, 2020
- Abate by
- Mar 24, 2020
- Penalty
- Initial $20,781 · Current $17,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: On or about September 20, 2019, an employee was exposed to physical injury, while performing the setup operation of stringing line on Line 7 and the roll stand, and the employer did not provide the employee with authorized employee lockout training. MONAHAN FILAMENTS, LLC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, 29 CFR 1910.147(c)(7)(i)(A), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1352068, CITATION NUMBER 1, ITEM NUMBER 1, AND WAS AFFIRMED AS A FINAL ORDER ON FEBRUARY 19, 2019, WITH RESPECT TO A WORKPLACE LOCATED AT 215 EGYPTIAN TRAIL, ARCOLA, IL 61910.
Recent events (3)
- — F (R) $17000
- — C (R) $20781
- — Z (R) $20781
More inspections at Monahan Filaments, LLC
View Monahan Filaments, LLC's full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344355425.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.