Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: D & SON'S CONSTRUCTION INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of D & SON'S CONSTRUCTION INC. in 3001 MANNHEIM RD., DES PLAINES, IL 60018 (NAICS 238140). OSHA activity number 343531430.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch D & Son'S Construction INC. — free Get an email when a new federal OSHA severe-injury report for D & Son'S Construction INC. is published. One employer, no account, unsubscribe in one click.
Site address
3001 MANNHEIM RD.
City
DES PLAINES
State
IL
ZIP
60018
Mailing
5757 S. LAFLIN ST., CHICAGO, IL 60636
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
5
Ownership type
A

3 citations on file for this inspection.

1926.451 G01

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 8, 2019
Abate by
Feb 14, 2019
Penalty
Initial $3,978 · Current $3,978
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level:       a)  On October 11, 2018, employees engaged in masonry work were not protected from the hazards of falling approximately 50 feet to the ground while working from a tubular welded frame scaffold platform.      In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • — A (S) $3978
  • — I (S) $2500
  • — Z (S) $3978

1926.501 B01

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 8, 2019
Abate by
Feb 14, 2019
Penalty
Initial $3,978 · Current $3,978
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:        a)  On October 11, 2018, employees engaged in masonry work were not protected from fall hazards of approximately 40 feet to the ground, while working along an unprotected edge of the deck.       In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • — A (S) $3978
  • — I (S) $2500
  • — Z (S) $3978

1926.501 B04 I

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 8, 2019
Abate by
Feb 14, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.501(b)(4)(i):  Each employee on walking/working surfaces was not protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels by personal fall arrest systems, covers or guardrail systems erected around such holes:    a)  On October 11, 2018, employees were not protected from the hazard of falling approximately 10 feet to the lower level through unguarded floor opening.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • — A (S) $0
  • — I (S) $0
  • — Z (S) $0

View D & Son'S Construction INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343531430.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.