BELLEVUE, ID ·
OSHA Inspection: TAFT DESIGN WORKS, INC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of TAFT DESIGN WORKS, INC in 109 HONEYSUCKLE ST, BELLEVUE, ID 83313 (NAICS 339999). OSHA activity number 343569406.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TAFT DESIGN WORKS, INC
- Site address
- 109 HONEYSUCKLE ST
- City
- BELLEVUE
- State
- ID
- ZIP
- 83313
- Mailing
- 109 HONEYSUCKLE ST, BELLEVUE, ID 83313
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339999
- Employees
- 5
- Ownership type
- Private (A)
Citations
7 citations on file for this inspection.
1910.22 A01
- Issued
- Dec 3, 2018
- Abate by
- Dec 28, 2018
- Penalty
- Initial $1,663 · Current $832 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): The employer failed to provide a clean and sanitary condition for all places of employment, passageways, storerooms, service rooms, and walking-working surfaces. (a) Cabinet Shop: On or about November 1, 2018 and at times prior, employees were cutting and fabricating cabinets. Generated wood dust is not being cleaned-up to prevent build up. Note: Abatement certification is required for this item.
Recent events (2)
- · I (S) $831.5
- · Z (S) $1663
1910.178 L01 I
- Issued
- Dec 3, 2018
- Abate by
- Dec 28, 2018
- Penalty
- Initial $1,663 · Current $832 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) Cabinet Shop: On or about November 1, 2018 and at times prior, employees were operating a Hyster Model S50XM forklift to move lumber and finished cabinets. Note: Abatement certification is required for this item.
Recent events (2)
- · I (S) $831.5
- · Z (S) $1663
1910.178 L02 II
- Issued
- Dec 3, 2018
- Abate by
- Dec 28, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. (a) Cabinet Shop: On or about November 1, 2018 and at times prior, employees were operating a Hyster Model S50XM forklift to move lumber and finished cabinets. Note: Abatement certification is required for this item.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.178 Q07
- Issued
- Dec 3, 2018
- Abate by
- Dec 28, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: (a) Cabinet Shop: On or about November 1, 2018 and at times prior, employees were operating a Hyster Model S50XM forklift to move lumber and finished cabinets. Note: Abatement certification is required for this item.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.213 C01
- Issued
- Dec 3, 2018
- Abate by
- Dec 28, 2018
- Penalty
- Initial $3,326 · Current $1,663 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a) Cabinet Shop: On or about October 30, 2018 and at times prior, employees were ripping lumber wtih a 10 inch. Powermatic table saw. Note: Abatement certification is required for this item.
Recent events (2)
- · I (S) $1663
- · Z (S) $3326
1910.213 C02
- Issued
- Dec 3, 2018
- Abate by
- Dec 28, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: (a) Cabinet Shop: On or about October 30, 2018 and at times prior, employees were ripping lumber wtih a 10 inch. Powermatic table saw. Note: Abatement certification is required for this item.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.213 C03
- Issued
- Dec 3, 2018
- Abate by
- Dec 28, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: (a) Cabinet Shop: On or about October 30, 2018 and at times prior, employees were ripping lumber wtih a 10 inch. Powermatic table saw. Note: Abatement certification is required for this item.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections at Taft Design Works, INC
View Taft Design Works, INC's full OSHA safety record →
More inspections in this industry (NAICS 339999)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343569406.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.