STEVENSVILLE, MT ·
OSHA Inspection: GLACIER TOOL & DIE INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GLACIER TOOL & DIE INC. in 3961 US HWY 93 N., STEVENSVILLE, MT 59870 (NAICS 332994). OSHA activity number 343591897.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GLACIER TOOL & DIE INC.
- Site address
- 3961 US HWY 93 N.
- City
- STEVENSVILLE
- State
- MT
- ZIP
- 59870
- Mailing
- 3961 US HWY 93 N., STEVENSVILLE, MT 59870
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332994
- Employees
- 13
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.219 D01
- Issued
- Feb 13, 2019
- Abate by
- Mar 12, 2019
- Penalty
- Initial $2,577 · Current $1,546 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Glacier Tool and Die, Inc., Rockwell Drill Press: On or about November 7, 2018 and at times prior, employees were exposed to caught in hazards from in going nip point while using the Rockwell Drill Press serial number: EU-6307 with an unguarded pulley to ream holes.
Recent events (2)
- · I (S) $1546.2
- · Z (S) $2577
1910.219 E01 I
- Issued
- Feb 13, 2019
- Abate by
- Mar 12, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: a) Glacier Tool and Die, Inc., Rockwell Drill Press: On or about November 7, 2018 and at times prior, employees were exposed to caught in hazards from in going nip point while using the Rockwell Drill Press serial number: EU-6307 with an unguarded belt to ream holes.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.147 C06 I
- Issued
- Feb 13, 2019
- Abate by
- Mar 12, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Glacier Tool and Die, Inc.: On or about November 7, 2018 and at times prior, the employer failed to conduct an annual audit of the lock out tag out program.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.147 C07 III A
- Issued
- Feb 13, 2019
- Abate by
- Mar 12, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iii)(A): Retraining was not provided for authorized and affected employees when there was a change in their job assignments, a change in machines, equipment or processes that presented a new hazard, or when there was a change in the energy control procedures: a) Glacier Tool and Die, Inc.: On or about November 7, 2018 and a times prior, the employer failed to retrain employees, when there was an introduction of new equipment, on the changes to the company lock out tag out program.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Glacier Tool & DIE INC.
View Glacier Tool & DIE INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332994)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343591897.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.