Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SCHEERER BEARING CORPORATION

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of SCHEERER BEARING CORPORATION in 645 DAVISVILLE ROAD, WILLOW GROVE, PA 19090 (NAICS 332991). OSHA activity number 343635173.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Scheerer Bearing Corporation — free Get an email when a new federal OSHA severe-injury report for Scheerer Bearing Corporation is published. One employer, no account, unsubscribe in one click.
Site address
645 DAVISVILLE ROAD
City
WILLOW GROVE
State
PA
ZIP
19090
Mailing
P.O. BOX 156, HORSHAM, PA 19044
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332991
Employees
26
Ownership type
A

3 citations on file for this inspection.

1910.157 G02

Serious Gravity 1 1 instance 5 exposed
Issued
Jan 11, 2019
Abate by
Jan 31, 2019
Penalty
Initial $2,968 · Current $1,484 Reduced

Hazardous substances 2037

29 CFR 1910.157(g)(2): The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting was not provided to all employees upon initial employment, and at least annually thereafter:      a) Scheerer Bearing - On or about November 27, 2018, employees using flammable liquids such as, but not limited to, Safety-Kleen Solvent to clean metal bearings were provided fire extinguishers to use during incipient stage fire fighting, but the employer did not provide initial training and or annually thereafter as required.    Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.    ABATEMENT NOTE: By this date the employer must either correct the alleged violation or implement a Fire Safety Policy, as outlined in 29 CFR 1910.38(a) and (b) which included the evacuation requirement of 29 CFR 1910.157(b).
Recent events (2)
  • — I (S) $1484
  • — Z (S) $2968

1910.242 B

Serious Gravity 1 1 instance 3 exposed
Issued
Jan 11, 2019
Abate by
Jan 31, 2019
Penalty
Initial $2,968 · Current $1,484 Reduced
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:    a) Scheerer Bearing - On or about November 27, 2018, an employee was using a compressed air nozzle to blow residual coolant and metal debris off of machined parts that had a dead end pressure in excess of 85 psi, exposing the employee to compressed air hazards.    Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $1484
  • — Z (S) $2968

1910.1200 H01

Serious Gravity 1 1 instance 3 exposed
Issued
Jan 11, 2019
Abate by
Jan 31, 2019
Penalty
Initial $2,968 · Current $1,484 Reduced

Hazardous substances 2037

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:     a) Scheerer Bearing - On or about November 27, 2018, employees were exposed to hazardous chemicals, such as but not limited to Safety-Kleen Solvent, and the employer did not provide effective information and training on hazards of such chemicals as required.      Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.         ABATEMENT NOTE:    Employees shall be informed of the following:   1. The requirements of this section;   2. Any operations where hazardous chemicals are present;   3. The location and availability of the written Hazard Communication Program, list(s) of hazardous chemicals and Safety Data Sheets.
Recent events (2)
  • — I (S) $1484
  • — Z (S) $2968

View Scheerer Bearing Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343635173.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.