BREWTON, AL —
OSHA Inspection: T. R. MILLER MILL CO., INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of T. R. MILLER MILL CO., INC. in 215 DEER STREET, BREWTON, AL 36427 (NAICS 321113). OSHA activity number 343727202.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- T. R. MILLER MILL CO., INC.
- Site address
- 215 DEER STREET
- City
- BREWTON
- State
- AL
- ZIP
- 36427
- Mailing
- PO BOX 708, BREWTON, AL 36427
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 199
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 F03 II D
- Issued
- May 29, 2019
- Abate by
- Jun 17, 2019
- Penalty
- Initial $5,754 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: a) Roller Beds in the Pole Mill: On or about January 16, 2019 and at times prior thereto, the employer did not ensure each authorized person affixed a personal lock to the relevant energy isolating device (electrical cutout box) or group lockout box while reinstalling a chain to the sprocket of the respective roller bed which exposed employees to amputations and other injuries associated with the inadvertent startup and moving machinery components.
Recent events (2)
- — I (O) $4000
- — Z (S) $5754
1910.215 B09
- Issued
- May 29, 2019
- Penalty
- Initial $3,913 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top was allowed to exceed one-fourth inch: a) Floor Grinder in the Fabrication Shop: On or about January 16, 2019 and at times prior thereto, the employer did not ensure the tongue guard was adjusted prior to use which exposed an employee to injuries associated with being struck-by flying debris. b) Bench Grinder in the Machine Shop: On or about January 16, 2019 and at times prior thereto, the employer did not ensure the tongue guard was adjusted prior to use which exposed an employee to injuries associated with being struck-by flying debris.
Recent events (2)
- — I (O) $3000
- — Z (S) $3913
1910.303 B01
- Issued
- May 29, 2019
- Abate by
- Jun 17, 2019
- Penalty
- Initial $5,754 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees: a) Roller Bed in the Pole Mill: On or about January 16, 2019 and at times prior thereto, the employer did not ensure the electrical cutout switch used to de-energize the roller bed was free from damage which exposed employees injuries associated with arc flashes and electrical shock.
Recent events (2)
- — I (S) $4000
- — Z (S) $5754
More inspections at T. R. Miller Mill CO., INC.
View T. R. Miller Mill CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343727202.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.