Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,871Inspections Most recent open 2026-07-30 Last loaded 2026-08-03

OSHA Inspection: AMV, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of AMV, LLC in 400 CAR STREET, LA CROSSE, WI 54603 (NAICS 327215). OSHA activity number 343734554.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch AMV, LLC for free Get an email when a new federal OSHA severe-injury report for AMV, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
AMV, LLC
Site address
400 CAR STREET
City
LA CROSSE
State
WI
ZIP
54603
Mailing
P.O. BOX 3124, LA CROSSE, WI 54602
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327215
Employees
6
Ownership type
A

5 citations on file for this inspection.

1910.178 P01

Deleted Serious Gravity 1 1 instance 6 exposed
Issued
Jun 3, 2019
Abate by
Jul 1, 2019
Penalty
Initial $1,705 · Current $0 Reduced
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s).   On or about May 8, 2019, and times prior, employees operating the electric forklift were doing so without a seatbelt.
Recent events (2)
  • · I (S) $0
  • · Z (S) $1705

1910.212 A03 II

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 3, 2019
Abate by
Jul 1, 2019
Penalty
Initial $3,978 · Current $2,131 Reduced
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefore, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.    On or about May 3, 2019, and times prior, employees operating a brick saw were doing so with their hands within close proximity of the unguarded point of operation.
Recent events (2)
  • · I (S) $2131.25
  • · Z (S) $3978

1910.219 F01

Serious Gravity 5 4 instances 6 exposed
Issued
Jun 3, 2019
Abate by
Jul 1, 2019
Penalty
Initial $2,842 · Current $2,131 Reduced
29 CFR 1910.219(f)(1): Gear(s) were not guarded by a complete enclosure or by one of the methods specified in 29 CFR 1910.219(f)(1)(ii) and (f)(1)(iii):    On or about May 1, 2019, and times prior, employees were exposed to unguarded gears, chains, and sprockets on the extruder and furnace.
Recent events (2)
  • · I (S) $2131.25
  • · Z (S) $2842

1910.219 F03

Serious Gravity 5 4 instances 6 exposed
Issued
Jun 3, 2019
Abate by
Jul 1, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above the floor or platform were not enclosed:  On or about May 1, 2019, and times prior, employees were exposed to unguarded gears, chains, and sprockets on the extruder and furnace.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.178 L04 I

Other-than-serious 1 instance 6 exposed
Issued
Jun 3, 2019
Abate by
Jul 1, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(4)(i): Refresher training including an evaluation of the effectiveness of the training, shall be conducted as required by paragraph (l)(4)(ii) to ensure that the operator has the knowledge and skills needed to operate the powered industrial truck safely.  On or about May 8, 2019, and times prior, refresher training, including an evaluation, was not performed for the operators of the electric forklift.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

View AMV, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343734554.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.