HARLINGEN, TX —
OSHA Inspection: NEW CORE, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of NEW CORE, INC. in 22673 HAND ROAD, HARLINGEN, TX 78552 (NAICS 332710). OSHA activity number 343767752.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NEW CORE, INC.
- Site address
- 22673 HAND ROAD
- City
- HARLINGEN
- State
- TX
- ZIP
- 78552
- Mailing
- 22673 HAND ROAD, HARLINGEN, TX 78552
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 25
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.95 C01
- Issued
- Jul 11, 2019
- Abate by
- Aug 6, 2019
- Penalty
- Initial $5,304 · Current $2,000 Reduced
81108111
General-duty citation text
29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.9(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent: On or about February 26, 2019, at this electric motor and parts manufacturing establishment, employees were exposed to noise hazards without a continuing and effective hearing conservation program in place: a. The Machine Operator at Punch Press #1 was exposed to a noise level of 89.10 dB during a 459.26 minutes sampling period; b. The Machine Operator at Punch Press #2 was exposed to a noise level of 88.10 dB during a 430.58 minutes sampling period; and, c. The Machine Operator at Punch Press #5 was exposed to a noise level of 90.20 dB during a 416.00 minutes sampling period.
Recent events (2)
- — I (S) $2000
- — Z (S) $5304
1910.147 C01
- Issued
- Jul 11, 2019
- Penalty
- Initial $9,282 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: On or about January 12, 2019, at this establishment, in the plant production area, employees were exposed to struck-by, caught-in, amputation and electrical hazards when performing service and/or maintenance on presses, such as but not limited to; removing damaged parts, repair work, and set-up. An energy control program with all required elements was not established by the employer.
Recent events (2)
- — I (S) $5000
- — Z (S) $9282
1910.132 D02
- Issued
- Jul 11, 2019
- Abate by
- Aug 6, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: At this establishment, employees were exposed to hazards such as, but not limited to, struck-by, caught-in/between, hazardous energies, eye and hand burns, chemicals and materials. The employer did not verify and evaluated the workplace through a written certificate that a hazard assessment was performed.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 K
- Issued
- Jul 11, 2019
- Abate by
- Jul 30, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k): The employer did not provide training and the basic information in Appendix D of this section for employees provided respirators for voluntary use: At this establishment, the employer did not train employees on basic information as contained in Appendix D of 29 CFR 1910.134, to ensure safe use of respirators.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.179 J02
- Issued
- Jul 11, 2019
- Abate by
- Aug 6, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(2): The following items were not be inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, including observation during operation for any defects which might appear between regular inspections: Employees hoisted heavy equipment and material with overhead cranes. The employer did not perform frequent inspections of their cranes to ensure proper function.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.179 J03
- Issued
- Jul 11, 2019
- Abate by
- Aug 6, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(3): Complete inspections of the crane was not being performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section: Employees hoisted heavy equipment and molds with overhead cranes. The employer did not perform periodic inspections in the past 12 months, to ensure cranes are functioning properly.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at NEW Core, INC.
View NEW Core, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343767752.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.