DAWSONVILLE, GA ·
OSHA Inspection: FIVE STAR ARCHITECTURAL, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of FIVE STAR ARCHITECTURAL, LLC in 68 GROGAN DRIVE, DAWSONVILLE, GA 30534 (NAICS 337212). OSHA activity number 343770061.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FIVE STAR ARCHITECTURAL, LLC
- Site address
- 68 GROGAN DRIVE
- City
- DAWSONVILLE
- State
- GA
- ZIP
- 30534
- Mailing
- 68 GROGAN DRIVE, DAWSONVILLE, GA 30534
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337212
- Employees
- 37
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 L01 I
- Issued
- Aug 5, 2019
- Penalty
- Initial $5,304 · Current $3,713 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): On or about 2/6/2019 throughout the facility employees were exposed to struck by hazards where powered industrial truck operators were not trained or evaluated in accordance with the standard.
Recent events (2)
- · I (S) $3712.8
- · Z (S) $5304
1910.303 B02
- Issued
- Aug 5, 2019
- Penalty
- Initial $3,978 · Current $2,785 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a. On or about 2/6/2019 in the production area a power strip was used at the CNC #1 table exposing workers performing cutting operations to electrical shock and burn hazards where the orange 110V extension cord was "daisy chained" powering a relocatable power tap which powered the printer, monitor/CPU, and phone charger. b. On or about 2/6/2019 in the production area a power strip at the CNC #2 table exposing workers performing cutting operations to electrical shock and burn hazards where the yellow 110V extension cord was "daisy chained" powering a relocatable power tap which powered the printer, monitor/CPU.
Recent events (2)
- · I (S) $2784.6
- · Z (S) $3978
1910.305 G01 IV A
- Issued
- Aug 5, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a) On or about 2/6/2019 in the production area where employees engaged in performing cutting operations and plugging/unplugging electrical equipment at the CNC #1 table were exposed to electrical shock and burn hazards where the orange 110V extension cord being used in place of permanent wiring was "daisy chained" powering a relocatable power tap which powered the printer, monitor/CPU, and phone charger. b) On or about 2/6/2019 in the production area where employees engaged in performing cutting operations and plugging/unplugging electrical equipment at the CNC #2 table were exposed to electrical shock and burn hazards where the Yellow 110V extension cord being used in place of permanent wiring was "daisy chained" powering a relocatable power tap which powered the printer, monitor/CPU.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.305 B01 II
- Issued
- Aug 5, 2019
- Penalty
- Initial $3,978 · Current $2,503 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: On or about 2/6/2019 at the CNC #1, 250V electrical panel, workers throwing the breakers or while performing cutting operations in the immediate area were exposed to electrical shock and thermal burn hazards where there was an unused opening, exposing the electrical components inside.
Recent events (2)
- · I (S) $2502.6
- · Z (S) $3978
1910.178 Q07
- Issued
- Aug 5, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Powered industrial trucks were not examined daily: On or about 2/6/2019 throughout the facility, the employer did not require powered industrial trucks to be inspected daily.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Five Star Architectural, LLC
View Five Star Architectural, LLC's full OSHA safety record →
More inspections in this industry (NAICS 337212)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343770061.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.