Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: NATION PIZZA PRODUCTS, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of NATION PIZZA PRODUCTS, LLC in 601 E. ALGONQUIN, SCHAUMBURG, IL 60173 (NAICS 311412). OSHA activity number 343872172.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Nation Pizza Products, LLC for free Get an email when a new federal OSHA severe-injury report for Nation Pizza Products, LLC is published. One employer, no account, unsubscribe in one click.
Site address
601 E. ALGONQUIN
City
SCHAUMBURG
State
IL
ZIP
60173
Mailing
601 E. ALGONQUIN, SCHAUMBURG, IL 60173
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311412
Employees
600
Ownership type
Private (A)

3 citations on file for this inspection.

1910.147 D

Serious Gravity 5 1 instance 3 exposed
Issued
Jun 27, 2019
Abate by
Aug 26, 2019
Penalty
Initial $10,419 · Current $8,288 Reduced
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) was not done in sequence to achieve energy control by performing the following steps as required by 29 CFR 1910.147(d)(1)-(6):  1.      Turn off and shut down power to the machinery,  2.      Physically locate and operate energy-isolating devices in such a manner as to isolate the machine or equipment from the energy source(s),  3.      Affix lockout/tagout devices to each energy isolating device,  4.      Verify isolation and de-energization of machinery have been accomplished prior to starting the maintenance and/or servicing work:      a) Bakery Room- On or about March 20, 2019, employees were exposed to machine hazards associated with moving parts while performing setups and adjustments on the Bakery Presses 1 and 2. The employer did not implement energy control application steps as the machine was not shut down or deenergized to perform setup or adjustments [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving dissipation machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards.
Recent events (2)
  • · I (S) $8287.5
  • · Z (S) $10419

1910.212 A01

Serious Gravity 10 2 instances 3 exposed
Issued
Jun 27, 2019
Penalty
Initial $13,260 · Current $8,288 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:      a) Bakery Room- On March 21, 2018, the employer did not ensure that guards were designed to adequately protect employees from coming in contact with point of operation hazards and moving parts on the front and back end of Bakery Press 1 and 2.      No abatement certification or documentation is required for this item.
Recent events (2)
  • · I (S) $8287.5
  • · Z (S) $13260

1904.39 A02

Deleted Other-than-serious 1 instance 1 exposed
Issued
Jun 27, 2019
Penalty
Initial $10,419 · Current $0 Reduced
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours, either by telephone or in person to the OSHA Area Office that is nearest to the site of the incident, by telephone to the OSHA toll-free central telephone number, 1-800-321-OSHA (1-800-321-6742), or by electronic submission using the reporting application located on OSHAs public web site at www.osha.gov:   a) Bakery Room- On or about March 16, 2019, the employer did not report to OSHA, within twenty-four (24) hours, a work-related injury that resulted in an amputation injury. The amputation injury was reported on March 18, 2019.
Recent events (2)
  • · I (O) $0
  • · Z (O) $10419

View Nation Pizza Products, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343872172.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.