SHANNON, MS —
OSHA Inspection: SOUTH ATLANTIC, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SOUTH ATLANTIC, LLC in 61 COUNTY ROAD 520, SHANNON, MS 38868 (NAICS 332812). OSHA activity number 343904843.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SOUTH ATLANTIC, LLC
- Site address
- 61 COUNTY ROAD 520
- City
- SHANNON
- State
- MS
- ZIP
- 38868
- Mailing
- 61 COUNTY ROAD 520, SHANNON, MS 38868
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332812
- Employees
- 30
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- May 20, 2019
- Abate by
- Jun 12, 2019
- Penalty
- Initial $13,260 · Current $7,956 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. (a) Facility - On or about April 02, 2019 the employer did not have procedures specific to each machine developed, documented and utilized for the control of energy sources of equipment, such as but not limited to, 5 overhead cranes when employees performed servicing and maintenance exposing employees to caught-in and struck-by hazards.
Recent events (2)
- — I (S) $7956
- — Z (S) $13260
1910.147 C06 I
- Issued
- May 20, 2019
- Abate by
- Jun 12, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: (a) Facility - On or about April 02, 2019 the employer had not performed the required periodic inspection of their energy control procedures for equipment such as but not limited to, 5 overhead cranes prior to employees performing servicing and maintenance exposing employees to caught-in and struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- May 20, 2019
- Abate by
- Jun 19, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: (a) Facility - On or about April 02, 2019 the employer had not provided adequate training to the employees on energy control procedures for equipment such as but not limited to, 5 overhead cranes, prior to employees performing servicing and maintenance exposing employees to caught-in and struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.179 G01 V
- Issued
- May 20, 2019
- Abate by
- Jun 19, 2019
- Penalty
- Initial $9,661 · Current $5,797 Reduced
General-duty citation text
29 CFR 1910.179(g)(1)(v): Pendant control boxes shall be constructed to prevent electrical shock and shall be clearly marked for identification of functions. (a) Deshazo 20 Ton Top Running Single Girder Crane - On or about April 02, 2019 the function labels on the pendant control station were not legible. Employees were exposed to struck-by hazards because of the pendant functions not being identified on the pendant control.
Recent events (2)
- — I (S) $5796.6
- — Z (S) $9661
1910.179 J02 III
- Issued
- May 20, 2019
- Abate by
- Jun 19, 2019
- Penalty
- Initial $9,661 · Current $5,797 Reduced
General-duty citation text
29 CFR 1910.179(j)(2)(iii): Monthly inspections of hooks, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the hook inspected, were not performed: (a) Deshazo 20 Ton Top Running Single Girder Crane - On or about April 02, 2019 the last documented monthly the crane hook was completed on March 14, 2018. The required inspection of the crane hook identifies any damage to the hook of the crane that can fail during regular usage. Employees were exposed to struck-by hazards when it is not properly inspected.
Recent events (2)
- — I (S) $5796.6
- — Z (S) $9661
1910.179 J03
- Issued
- May 20, 2019
- Abate by
- Jun 19, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months: (a) Deshazo 20 Ton Top Running Single Girder Crane - On or about April 02, 2019 the last documented monthly crane inspection was completed on March 14, 2018. The required inspection of the crane identifies components of the crane that can fail during regular usage. Employees were exposed to struck-by hazards when it is not properly inspected.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at South Atlantic, LLC
View South Atlantic, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332812)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343904843.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.