Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ELITE COATINGS INC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of ELITE COATINGS INC in 1409 RED MAPLE ROAD, DE PERE, WI 54115 (NAICS 332812). OSHA activity number 343905378.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Elite Coatings INC — free Get an email when a new federal OSHA severe-injury report for Elite Coatings INC is published. One employer, no account, unsubscribe in one click.
Establishment
ELITE COATINGS INC
Site address
1409 RED MAPLE ROAD
City
DE PERE
State
WI
ZIP
54115
Mailing
PO BOX 5395, DE PERE, WI 54115
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332812
Employees
28
Ownership type
A

4 citations on file for this inspection.

1910.134 F02

Serious Gravity 1 3 instances 10 exposed
Issued
Aug 30, 2019
Abate by
Sep 30, 2019
Penalty
Initial $3,978 · Current $2,785 Reduced
29 CFR 1910.134(f)(2): The employer shall ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter:  a) On or about April 4, 2019, 2 sanders using half mask cartridge respirators were not fit tested prior to using the half mask cartridge respirators.  b) On or about April 4, 2019, a Spray Painter using a full face cartridge respirator was last fit tested on August 7, 2017.  c) On or about April 4, 2019, a Spray Painter using a full face cartridge respirator was last fit tested on January 6, 2018.
Recent events (2)
  • — I (S) $2784.6
  • — Z (S) $3978

1910.134 G01 I A

Serious Gravity 1 1 instance 2 exposed
Issued
Aug 30, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.134(g)(1)(i)(A): The employer shall not permit respirators with tight-fitting facepieces to be worn by employees who have: Facial hair that comes between the sealing surface of the facepiece and the face or that interferes with valve function:  a) On April 4, 2019, two spray painters required to wear full face cartridge respirators had several days growth of facial hair.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1000 A02

Serious Gravity 1 1 instance 5 exposed
Issued
Aug 30, 2019
Abate by
Sep 30, 2019
Penalty
Initial $3,978 · Current $2,785 Reduced

Hazardous substances 9135

29 CFR 1910.1000(a)(2): Other substances -- 8-hour Time Weighted Averages. An employee's exposure to any substance in Table Z-1, the exposure limit of which is not preceded by a "C", shall not exceed the 8-hour Time Weighted Average given for that substance any 8-hour work shift of a 40-hour work week. The 8-hour Time Weighted Avera exposure limit for Particulate Not Otherwise Regulated (Total Dust) is 15 mg/M3:  a) On April 4,2019, a Sander was exposed to 37 mg/M3 of Particulate Not Otherwise Regulated (Total Dust) over a 264 minute time period. A 264 minute time weighted average is equivalent to an 8-hour Time Weighted Average of 20.56 mg/M3 which is 137% of the Particulate Not Otherwise Regulated (Total Dust) 8-hour Time Weighted Average exposure limit of 15 mg/M3.
Recent events (2)
  • — I (S) $2784.6
  • — Z (S) $3978

1910.1000 E

Serious Gravity 1 1 instance 5 exposed
Issued
Aug 30, 2019
Abate by
Sep 30, 2019
Penalty
Initial $0 · Current $0

Hazardous substances 9135

29 CFR 1910.1000(e): To achieve compliance with paragraphs (a) through (d) of this section, administrative or engineering controls must first be determined and implemented whenever feasible. When such controls are not feasible to achieve full compliance, protective equipment or any other protective measures shall be used to keep the exposure of employees to air contaminants within the limits prescribed in this section. Any equipment and/or technical measures used for this purpose must be approved for each particular use by a competent industrial hygienist or other technically qualified person. Whenever respirators are used, their use shall comply with 1910.134:  a) On April 10, 2019, a Sander was exposed to 137% of the permissible exposure limit for particulate not otherwise regulated (total dust).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Elite Coatings INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343905378.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.