Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CAPITAL INDUSTRIAL COATINGS, LLC

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of CAPITAL INDUSTRIAL COATINGS, LLC in I-294 AND BUSSE RD. ILLINOIS TOLLWAY BRIDGE, PARK RIDGE, IL 60068 (NAICS 238320). OSHA activity number 343934139.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Capital Industrial Coatings, LLC — free Get an email when a new federal OSHA severe-injury report for Capital Industrial Coatings, LLC is published. One employer, no account, unsubscribe in one click.
Site address
I-294 AND BUSSE RD. ILLINOIS TOLLWAY BRIDGE
City
PARK RIDGE
State
IL
ZIP
60068
Mailing
141 EAST 141ST ST, HAMMOND, IN 46327
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238320
Employees
5
Ownership type
A

3 citations on file for this inspection.

1910.134 H01 I

Other-than-serious 1 instance 1 exposed
Issued
Aug 9, 2019
Abate by
Sep 5, 2019
Penalty
Initial $5,304 · Current $3,000 Reduced

Hazardous substances 1591

29 CFR 1926.103:  NOTE: The requirements applicable to construction work under this section are identical to those set forth at 29 CFR 1910.134 of this chapter.    29 CFR 1910.134(h)(1)(i): Respirators issued for the exclusive use of an employee were not cleaned and disinfected as often as necessary to be maintained in a sanitary condition:    I-294 and Busse Rd. Park Ridge, IL 60068 - Capital Industrial Coatings, LLC did not ensure that respirators worn by employees were maintained in a sanitary condition, without lead contamination.    a) On or about April 10, 2019, an employee utilized a respirator which contained 68.5 micrograms of lead on the inside of the respirator while performing abrasive blasting operations on lead-coated steel structures.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (O) $3000
  • — Z (S) $5304

1926.62 D01 I

Other-than-serious 3 instances 3 exposed
Issued
Aug 9, 2019
Penalty
Initial $5,304 · Current $3,000 Reduced

Hazardous substances 1591

29 CFR 1926.62(d)(1)(i): Each employer who had a workplace or operation covered by 29 CFR 1926.62 did not initially determine if any employee was exposed to lead at or above the action level of 30 micrograms per cubic meter of air (30 ug/m3) calculated as an 8-hour time-weighted average (TWA):    I-294 and Busse Rd. Park Ridge, IL 60068 - Capital Industrial Coatings, LLC did not initially determine if any employee was exposed to lead at or above the action level of 30 ug/m3 calculated as an 8-hour TWA.    a) On or about April 10, 2019, employees performed abrasive blasting on a lead-coated steel bridge structure potentially exposing them to lead at or above the action level of 30 ug/m3 calculated as an 8-hour TWA.       No abatement certification or documentation is required for this item. The employer submitted air monitoring data from April 24, 2019 at the above noted site.
Recent events (2)
  • — I (O) $3000
  • — Z (S) $5304

1926.62 D01 III

Other-than-serious 4 instances 4 exposed
Issued
Aug 9, 2019
Penalty
Initial $0 · Current $0

Hazardous substances 1591

29 CFR 1926.62(d)(1)(iii): The employer did not collect personal samples representative of a full shift, including at least one sample for each job classification in each work area, either for each shift or for the shift with the highest exposure level:    I-294 and Busse Rd. Park Ridge, IL 60068 - Capital Industrial Coating, LLC did not collect personal samples representative of a full shift, including one sample for each job classification in each work area.    a) On or about April 10, 2019, employees performed abrasive blasting on a lead-coated steel bridge structure potentially exposing them to lead at or above the action level of 30 ug/m3 calculated as an 8-hour TWA.       No abatement certification or documentation is required for this item. The employer submitted air monitoring data from April 24, 2019 at the above noted site.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

View Capital Industrial Coatings, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343934139.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.