EAST MOLINE, IL —
OSHA Inspection: JMF MANUFACTURING, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of JMF MANUFACTURING, LLC in 500 36TH STREET, EAST MOLINE, IL 61244 (NAICS 423730). OSHA activity number 343979621.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JMF MANUFACTURING, LLC
- Site address
- 500 36TH STREET
- City
- EAST MOLINE
- State
- IL
- ZIP
- 61244
- Mailing
- 2735 62ND ST. COURT, BETTENDORF, IA 52722
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423730
- Employees
- 80
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.132 D02
- Issued
- May 16, 2019
- Abate by
- Jun 3, 2019
- Penalty
- Initial $5,304 · Current $3,700 Reduced
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment for the use of personal protective equipment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment: On or about April 30, 2019, the employer did not evaluate, develop and document a suitable personal protective equipment hazard assessment for the Packing tasks at Lines 1 - 8, nor did they complete a written certification that included the name of the person who certified that the evaluation had been performed and the date that the hazard assessment was completed.
Recent events (2)
- — I (S) $3700
- — Z (S) $5304
1910.133 A01
- Issued
- May 16, 2019
- Abate by
- Jun 3, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.133(a)(1): Protective eye or face equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment: On or about April 30, 2019, the employer did not provided suitable eye protection and employees were exposed to the following struck-by hazards: a) deflected staples when using a staple remover; and b) pneumatically driven staples when securing the inner box flaps.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L05
- Issued
- May 16, 2019
- Abate by
- Jun 17, 2019
- Penalty
- Initial $9,282 · Current $5,575 Reduced
General-duty citation text
29 CFR 1910.178(l)(5): Avoidance of duplicative training. If an operator has previously received training in a topic specified in paragraph (l)(3) of this section, and such training is appropriate to the truck and working conditions encountered, additional training in that topic is not required if the operator has been evaluated and found competent to operate the truck safely.
Recent events (2)
- — I (S) $5575
- — Z (S) $9282
1910.178 M01
- Issued
- May 16, 2019
- Abate by
- Jul 17, 2019
- Penalty
- Initial $9,282 · Current $5,575 Reduced
General-duty citation text
29 CFR 1910.178(m)(1): Trucks were driven up to person(s) standing in front of a bench or other fixed object: On or about April 22, 2019, at Line 1, a forklift operator was in the process of moving two full Master Cartons when the cartons fell crushing an employee. The employee had been standing between the load of Master Cartons on the forklift and an empty Master Carton in front of a fixed conveyor.
Recent events (2)
- — I (S) $5575
- — Z (S) $9282
1910.303 B02
- Issued
- May 16, 2019
- Abate by
- Jun 17, 2019
- Penalty
- Initial $5,304 · Current $3,700 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: On or about April 30, 2019, at Line 1, employees were exposed to electrical shock and burn hazards from a receptacle mounted inside a metal box used to power the F4 Flaring Machine and the metal box was not installed as listed or labeled for the intended use.
Recent events (2)
- — I (S) $3700
- — Z (S) $5304
1910.305 G02 III
- Issued
- May 16, 2019
- Abate by
- Jun 17, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables shall be connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws: On or about April 30, 2019, at Line 1, employees were exposed to electrical shock hazards from a flexible cord used to power the F4 Flaring Machine with the outer insulation pulled from the plug end of the cord exposing the inner wiring and the machine was not removed from service.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.29 B03
- Issued
- May 16, 2019
- Penalty
- Initial $1,327 · Current $500 Reduced
General-duty citation text
29 CFR 1904.29(b)(3): The employer did not enter each recordable injury or illness on the OSHA 300 Log and 301 Incident Report within seven (7) calendar days of receiving information that a recordable injury or illness had occurred: On April 22, 2019, a Utility employee at Line 1, suffered work-related recordable injury and the employer failed to recorded the injury on the OSHA 300 Log.
Recent events (2)
- — I (O) $500
- — Z (O) $1327
1904.41 A01
- Issued
- May 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.41(a)(1): the employer had not electronically submit information from their recordkeeping forms required under this part once a year and no later than the date listed in paragraph (c) of this section: On or about April 30, 2019, the employer failed to electronically submit information from their 2018 OSHA form 300A or equivalent by March 2, 2019.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at JMF Manufacturing, LLC
View JMF Manufacturing, LLC's full OSHA safety record →
More inspections in this industry (NAICS 423730)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343979621.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.