GREENVILLE, GA —
OSHA Inspection: NATIONAL FABRICATING SERVICES, INC.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of NATIONAL FABRICATING SERVICES, INC. in 56 JARRELL RD., GREENVILLE, GA 30222 (NAICS 339999). OSHA activity number 343983367.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NATIONAL FABRICATING SERVICES, INC.
- Site address
- 56 JARRELL RD.
- City
- GREENVILLE
- State
- GA
- ZIP
- 30222
- Mailing
- 1685 SOUTH DAVIS ROAD, LAGRANGE, GA 30240
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339999
- Employees
- 6
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 31, 2019
- Abate by
- Nov 13, 2019
- Penalty
- Initial $13,260 · Current $13,260
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1):The employer did not furnish employment and a place of employment which were free from recognized hazards that caused or were likely to cause death or serious physical harm to employees. a) Fabrication Area: On or about May 3, 2019, and at times prior, employees were allowed to stand near two unsupported sides of a structural base (frame) weighing a total of 3,968 pounds while a Skyjack SJ643TH telescoping forklift was being operated in close proximity, exposing employees to a struck-by hazard.
Recent events (2)
- — I (S) $13260
- — Z (S) $13260
1910.178 L01
- Issued
- Oct 31, 2019
- Abate by
- Nov 13, 2019
- Penalty
- Initial $9,282 · Current $9,282
General-duty citation text
29 CFR 1910.178(l)(1)(i): Operators were not trained in the safe operation of powered industrial trucks as demonstrated by the successful completion of the training and evaluation specified in this paragraph. a) Fabrication Area: On or about May 3, 2019, and at times prior, the employer exposed employees to struck-by hazards in that the employer failed to train forklift drivers in use of, but not limited to, the Skyjack SJ643TH telescoping forklift, serial number 87110842.
Recent events (2)
- — I (S) $9282
- — Z (S) $9282
1910.178 M01
- Issued
- Oct 31, 2019
- Abate by
- Nov 13, 2019
- Penalty
- Initial $9,282 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(m)(1): Trucks shall not be driven up to anyone standing in front of a bench or other fixed object. a) Fabrication Area: On or about May 3, 2019, and at times prior, the employer exposed employees to struck-by hazards in that the employer allowed employees to drive a forklift (Skyjack SJ643TH telescoping forklift, serial number 87110842) up to a steel structure with other employees standing in front of it.
Recent events (2)
- — I (S) $0
- — Z (S) $9282
1910.178 P01
- Issued
- Oct 31, 2019
- Abate by
- Nov 13, 2019
- Penalty
- Initial $9,282 · Current $9,282
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition: a) Fabrication Area: On or about May 3, 2019, and at times prior, the employer exposed employees to struck-by hazards in that the employer allowed employees to drive and be exposed to a defective forklift (Skyjack SJ643TH telescoping forklift, serial number 87110842).
Recent events (2)
- — I (S) $9282
- — Z (S) $9282
1910.178 Q07
- Issued
- Oct 31, 2019
- Abate by
- Nov 13, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: a) Fabrication Area: On or about May 3, 2019, and at times prior, the employer exposed employees to struck- by hazards in that a forklift (Skyjack SJ643TH telescoping forklift, serial number 87110842) was not inspected each shift before being placed in service.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at National Fabricating Services, INC.
View National Fabricating Services, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 339999)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343983367.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.