Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BURT STEEL, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of BURT STEEL, INC. in 920 NORTH DECATUR ST., MONTGOMERY, AL 36104 (NAICS 332312). OSHA activity number 343983748.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Burt Steel, INC. — free Get an email when a new federal OSHA severe-injury report for Burt Steel, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
BURT STEEL, INC.
Site address
920 NORTH DECATUR ST.
City
MONTGOMERY
State
AL
ZIP
36104
Mailing
920 NORTH DECATUR ST., MONTGOMERY, AL 36104
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
40
Ownership type
A

5 citations on file for this inspection.

1910.253 B04 III

Serious Gravity 5 2 instances 3 exposed
Issued
Jul 18, 2019
Abate by
Jul 26, 2019
Penalty
Initial $5,304 · Current $3,700 Reduced
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour:  (a) Welding area: On or about April 30, 2019 and at times prior thereto the employer exposed employees to fire hazards in that employees were allowed to walk and work in the same area where oxygen gas cylinders and acetylene gas cylinders were stored together.   b) Painting Preparation area: On or about April 30, 2019 and at times prior thereto the employer exposed employees to fire hazards in that employees were allowed to walk and work in the same area where oxygen gas cylinders and acetylene gas cylinders were stored together.
Recent events (2)
  • — I (S) $3700
  • — Z (S) $5304

1910.134 K06

Other-than-serious 1 instance 4 exposed
Issued
Jul 18, 2019
Abate by
Jul 26, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:  (a) Painting and Welding areas: On or about April 30, 2019 and at times prior thereto the employer did not provide employees wearing filtering face piece respirators voluntarily with basic advisory information on respirators as presented in Appendix D of 29 CFR 1910.134.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.253 B02 IV

Other-than-serious 1 instance 3 exposed
Issued
Jul 18, 2019
Abate by
Jul 26, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.253(b)(2)(iv): Valve protection caps, where cylinders were designed to accept caps, were not always in place, hand-tight, except when cylinders were in use or connected for use:  (a) Welding area: On or about April 30, 2019 and at times prior thereto the employer exposed employees to fire hazards and struck-by hazards in that compressed oxygen gas cylinder and compressed acetylene gas cylinder that were not connected for use did not have a valve protection caps on.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 G08

Other-than-serious 1 instance 4 exposed
Issued
Jul 18, 2019
Abate by
Jul 26, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8):   The employer did not ensure that Safety Data Sheets were readily accessible during each work shift to employees when they were in their work area(s):  (a) Painting and Welding areas: On or about April 30, 2019 and at times prior thereto the employer did not ensure that safety data sheets were readily accessible to employees in their work area during each work shift for the hazardous chemicals including but not limited to compressed oxygen gas, compressed acetylene gas, welding rods, grey and red oxide paint, and paint thinners
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 1 exposed
Issued
Jul 18, 2019
Abate by
Jul 26, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  (a) Painting area: On and about April 30, 2019 and at times prior thereto the employer did not provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment. Employees used products containing hazardous chemicals including but not limited to compressed oxygen gas, compressed acetylene gas, welding rods, grey and red oxide paint, and paint thinners.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Burt Steel, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343983748.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.