CANTON, GA —
OSHA Inspection: BTB SIDING LLC
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of BTB SIDING LLC in 101 HIDDEN TRAIL COURT LOT 4106, CANTON, GA 30114 (NAICS 238170). OSHA activity number 344016969.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BTB SIDING LLC
- Site address
- 101 HIDDEN TRAIL COURT LOT 4106
- City
- CANTON
- State
- GA
- ZIP
- 30114
- Mailing
- 202 LAKE DRIVE, ATLANTA, GA 30340
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.1200 E01
- Issued
- Sep 17, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $3,978 · Current $2,188 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (Construction Reference: 1926.59) On or about May 17, 2019 at a worksite located at 101 Hidden Trail Court, Lot 4106, in Canton, Georgia; employees were exposed to hazards associated with airborne silica where "James Hardie Building Products Inc." HardiePlank, cement fiber lap siding was being dry cut with "DeWalt 7-1/4 inch circular saws and the employer did not implement a written chemical hazard communication program.
Recent events (2)
- — I (S) $2187.9
- — Z (S) $3978
1910.1200 H01
- Issued
- Sep 17, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $3,978 · Current $2,188 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (Construction Reference: 1926.59) On or about May 17, 2019 at a worksite located at 101 Hidden Trail Court, Lot 4106, in Canton, Georgia; employees were exposed to hazards associated with airborne silica where "James Hardie Building Products Inc." HardiePlank, cement fiber lap siding was being dry cut with "DeWalt 7-1/4 inch circular saws and the employer did not provide affected employees with chemical hazard communication program training.
Recent events (2)
- — I (S) $2187.9
- — Z (S) $3978
1926.1153 I01
- Issued
- Sep 17, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(i)(1): The employer did not ensure that each employee is trained in accordance with the provisions of paragraph (i)(2) of this section: On or about May 17, 2019 at a worksite located at 101 Hidden Trail Court, Lot 4106, in Canton, Georgia; employees were exposed to hazards associated with airborne silica where "James Hardie Building Products Inc." HardiePlank, cement fiber lap siding was being dry cut with "DeWalt 7-1/4 inch circular saws and the employer did not provide training required by 1926.1153(i)(2).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 G01
- Issued
- Sep 17, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $3,978 · Current $2,188 Reduced
General-duty citation text
29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan: On or about May 17, 2019 at a worksite located at 101 Hidden Trail Court, Lot 4106, in Canton, Georgia; employees were exposed to hazards associated with airborne silica where "James Hardie Building Products Inc." HardiePlank, cement fiber lap siding was being dry cut with "DeWalt 7-1/4 inch circular saws and the employer did not develop and implement a written, silica exposure control plan.
Recent events (2)
- — I (S) $2187.9
- — Z (S) $3978
More inspections at BTB Siding LLC
View BTB Siding LLC's full OSHA safety record →
More inspections in this industry (NAICS 238170)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344016969.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.