Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: NORTH EAST WELDING INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of NORTH EAST WELDING INC. in 2076 86TH ST., BROOKLYN, NY 11214 (NAICS 238120). OSHA activity number 344073994.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch North East Welding INC. — free Get an email when a new federal OSHA severe-injury report for North East Welding INC. is published. One employer, no account, unsubscribe in one click.
Site address
2076 86TH ST.
City
BROOKLYN
State
NY
ZIP
11214
Mailing
670 MORGAN AVE., BROOKLYN, NY 11222
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
3
Ownership type
A

7 citations on file for this inspection.

1926.404 B01 I

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 3, 2019
Penalty
Initial $2,842 · Current $1,342 Reduced
29 CFR 1926.404(b)(1)(i): Employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites.    a) 2nd floor:    Employees used an electric powered welding machine to weld metal decks. The welding machine was connected to an extension cord, which was routed directly to the circuit breaker of the next door building and was not provided with a ground fault circuit interrupter. On or about 06/11/19.
Recent events (2)
  • — I (S) $1342
  • — Z (S) $2842

1926.405 G02 IV

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 3, 2019
Penalty
Initial $2,842 · Current $2,842
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws.  a) 2nd floor:  Employees used an electric powered welding machine to weld metal decks. The welding machine was connected to an extension cord, which was not provided strain relief to its outlet. On or about 06/11/19.
Recent events (2)
  • — I (S) $2842
  • — Z (S) $2842

1926.416 E01

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 3, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used.  a) 2nd floor:  Employees used an electric powered welding machine to weld metal decks. The welding machine was connected to an extension cord, which was worn and frayed with damaged insulation. On or about 06/11/19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 3, 2019
Penalty
Initial $2,842 · Current $1,342 Reduced
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports.    a) 2nd floor, south side:    An employee was working on the 2nd tier platform of a 2-tier-high supported scaffold. The work platform was not fully planked or decked between the front uprights and the guardrail supports. On or about 06/11/19.
Recent events (2)
  • — I (S) $1342
  • — Z (S) $2842

1926.451 E01

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 3, 2019
Penalty
Initial $2,842 · Current $1,342 Reduced
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access.    a) 2nd floor, south side:    Employees climbed the frames and cross braces of a 2-tier-high supported scaffold to access the 2nd tier scaffold platform and the roof level to do welding work. On or about 06/11/19.
Recent events (2)
  • — I (S) $1342
  • — Z (S) $2842

1926.451 G01 VII

Serious Gravity 10 1 instance 1 exposed
Issued
Dec 3, 2019
Penalty
Initial $3,978 · Current $2,290 Reduced
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section.    a) 2nd floor, south side:    An employee was working on the 2nd tier platform of a 2-tier-high supported scaffold, and was not protected from falling to lower levels by the use of fall protection systems. The employee was exposed to falling approximately 12 feet. On or about 06/11/19.
Recent events (2)
  • — I (S) $2290
  • — Z (S) $3978

1926.1051 A03

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 3, 2019
Penalty
Initial $2,842 · Current $1,342 Reduced
29 CFR 1926.1051(a)(3): A building or structure had only one point of access between levels, which was not kept clear to permit free passage of employees.    a) 2nd floor:    The 2nd floor had only one point of access from the 1st floor through an extension ladder. The access at the top of the ladder on the 2nd floor was not kept clear and was blocked by wire cable guardrails. On or about 06/11/19.
Recent events (2)
  • — I (S) $1342
  • — Z (S) $2842

View North East Welding INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344073994.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.