ATLANTA, GA —
OSHA Inspection: HOLLAND, L.P.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of HOLLAND, L.P. in 1680 MARIETTA ROAD GATE 8, ATLANTA, GA 30318 (NAICS 488210). OSHA activity number 344094321.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HOLLAND, L.P.
- Site address
- 1680 MARIETTA ROAD GATE 8
- City
- ATLANTA
- State
- GA
- ZIP
- 30318
- Mailing
- 1000 HOLLAND DRIVE, CRETE, IL 60417
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 488210
- Employees
- 35
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Dec 2, 2019
- Abate by
- Dec 27, 2019
- Penalty
- Initial $13,260 · Current $13,260
General-duty citation text
29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D): (a) West-facing side of I-Guide Platform: On or before June 13, 2019, and at times prior, the employer exposed employees to struck-by hazards, in that the employer did not develop a specific LOTO procedure for employees working on equipment such as, but not limited to, the I-Guide motors.
Recent events (2)
- — I (S) $13260
- — Z (S) $13260
1910.147 D05 I
- Issued
- Dec 2, 2019
- Abate by
- Dec 12, 2019
- Penalty
- Initial $13,260 · Current $13,260
General-duty citation text
29 CFR 1910.147(d)(5)(i): All potentially hazardous stored or residual energy was not relieved, disconnected, restrained or otherwise rendered safe after the application of lockout or tagout devices to energy isolating devices: (a) West-facing side of I-Guide Platform: On or before June 13, 2019, and at times prior, the employer exposed employees to struck-by hazards, in that the employer did not require employees to relieve stored or residual energy in a chain and sprocket assembly before trying to remove it for repair. NOTE: ENERGY SHOULD BE AT ZERO STATE.
Recent events (2)
- — I (O) $13260
- — Z (S) $13260
1910.212 A05
- Issued
- Dec 2, 2019
- Penalty
- Initial $5,683 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(5): Fan blade guard(s) were not provided where the periphery of the blades was less than seven feet from the floor or working level: (a) West-facing side of I-Guide Platform: On or before June 13, 2019, and at times prior, the employer exposed employees to struck-by hazards, in that the employer did not install guard on C1 I-Guide motor fan (Model # Unknown, S/N Unknown) .
Recent events (2)
- — I (S) $0
- — Z (S) $5683
1910.219 F03
- Issued
- Dec 2, 2019
- Abate by
- Dec 27, 2019
- Penalty
- Initial $13,260 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: (a) West-facing side of I-Guide Platform: On or before June 13, 2019, and at times prior, the employer exposed employees to struck-by hazards, in that the employer did not install guards on chain and sprockets for the re-weld I-Guide motors.
Recent events (2)
- — I (S) $0
- — Z (S) $13260
1910.29 K01 I
- Issued
- Dec 2, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.29(k)(1)(i): Toe boards, used for falling object protection, were not erected along the exposed edge of the overhead walking-working surface for a length that is sufficient to protect employees below: a) C1 I-Guide Platform: On or before June 13, 2019, and at times prior, the employer exposed employees to struck-by hazards, in that the employer did not install toe boards on the platform to protect against falling objects.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Holland, L.P.
View Holland, L.P.'s full OSHA safety record →
More inspections in this industry (NAICS 488210)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344094321.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.