Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: AECOM

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of AECOM in 2350 LOUISIANA AVENUE BLDG 4386, FORT POLK, LA 71459 (NAICS 921190). OSHA activity number 344114939.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Aecom — free Get an email when a new federal OSHA severe-injury report for Aecom is published. One employer, no account, unsubscribe in one click.
Establishment
AECOM
Site address
2350 LOUISIANA AVENUE BLDG 4386
City
FORT POLK
State
LA
ZIP
71459
Mailing
20501 SENECA MEADOWS PARKWAY SUITE 300, GERMANTOWN, MD 20876
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
921190
Employees
600
Ownership type
A

4 citations on file for this inspection.

1910.252 A02 VI C

Other-than-serious 1 instance 20 exposed
Issued
Jul 24, 2019
Abate by
Aug 13, 2019
Penalty
Initial $13,260 · Current $26,520
29 CFR 1910.252(a)(2)(vi)(C): Cutting or welding was permitted in the presence of explosive atmospheres (mixture of flammable gases, vapors, liquids, or dusts with air), or explosive atmospheres that could develop inside uncleaned or improperly prepared tanks or equipment which had previously contained such materials, or that could develop in areas with an accumulation of combustible dusts:    a) On or about June 24, 2019, in the Welding shop where new fuel tanks were recently fitted with used fuel pumps, the employer failed to inspect the tanks for the presence of an explosive atmosphere, which resulted in the injury of an employee.
Recent events (3)
  • — J (O) $26520
  • — C (S) $13260
  • — Z (S) $13260

1910.252 A02 XIII D

Other-than-serious 1 instance 20 exposed
Issued
Jul 24, 2019
Abate by
Aug 13, 2019
Penalty
Initial $13,260 · Current $0 Reduced
29 CFR 1910.252(a)(2)(xiii)(D): The employer did not recognize its responsibility for the safe usage of cutting or welding equipment, and did not advise all contractors about flammable materials or hazardous conditions of which they may not be aware:    a) On or about June 24, 2019, in the Welding shop where new fuel tanks were recently fitted with used fuel pumps, the employer failed to notify the employee of an explosive atmosphere, which resulted in the injury of an employee.
Recent events (3)
  • — J (O) $0
  • — C (S) $13260
  • — Z (S) $13260

1910.252 A03 I

Other-than-serious 1 instance 20 exposed
Issued
Jul 24, 2019
Abate by
Aug 13, 2019
Penalty
Initial $13,260 · Current $13,260
29 CFR 1910.252(a)(3)(i): Welding, cutting, or other hot work was performed on used drums, barrels, tanks, or other containers that had not been cleaned so thoroughly as to make absolutely certain there were no flammable materials present or any substances such as greases, tars, acids, or other materials which when subjected to heat, might produce flammable or toxic vapors:    a) On or about June 24, 2019, in the Welding shop where new fuel tanks were recently fitted with used fuel pumps, the employer failed to ensure employees cleaned the tanks of any residual fuel from used fuel pumps before welding was performed, which resulted in the injury of an employee.
Recent events (3)
  • — J (O) $13260
  • — C (S) $13260
  • — Z (S) $13260

1910.252 A03 II

Other-than-serious 1 instance 20 exposed
Issued
Jul 24, 2019
Abate by
Aug 13, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.252(a)(3)(ii): All hollow spaces, cavities, or containers were not vented to permit the escape of air or gases before preheating, cutting, or welding was performed:    a) On or about June 24, 2019, in the Welding shop where new fuel tanks were recently fitted with used fuel pumps, the employer failed to ensure employees vented tanks of combustible gases before welding was performed, which resulted in the injury of an employee.
Recent events (3)
  • — J (O) $0
  • — C (S) $0
  • — Z (S) $0

View Aecom's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344114939.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.