BONIFAY, FL —
OSHA Inspection: AUS MANUFACTURING COMPANY LLC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of AUS MANUFACTURING COMPANY LLC in 704 WEST HIGHWAY 90, BONIFAY, FL 32425 (NAICS 332313). OSHA activity number 344203708.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AUS MANUFACTURING COMPANY LLC
- Site address
- 704 WEST HIGHWAY 90
- City
- BONIFAY
- State
- FL
- ZIP
- 32425
- Mailing
- 704 WEST HIGHWAY 90, BONIFAY, FL 32425
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332313
- Employees
- 10
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 C02 I
- Issued
- Nov 18, 2019
- Abate by
- Jan 7, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: a) On or about August 2, 2019, throughout the facility, the employer failed to provided with the information contained in Appendix D to 29 CFR 1910.134 to employees that were permitted to use of respirators was voluntary.
Recent events (1)
- — Z (O) $0
1910.179 B05
- Issued
- Nov 18, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(b)(5): The rated load of crane(s) was not plainly marked on each side of the crane: a) On or about August 2, 2019, in the general manufacturing area, the employer failed to ensure that the bridge crane located next to the southern or front wall of the building was marked with the rated load. b) On or about August 2, 2019, in the general manufacturing area, the employer failed to ensure that the radial arm crane located in the CNC area of the building was marked with the rated load.
Recent events (1)
- — Z (O) $0
1910.179 J01 I
- Issued
- Nov 18, 2019
- Abate by
- Dec 13, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(1)(i): Prior to initial use, all new and altered cranes were not inspected to insure compliance with the provisions of 29 CFR 1910.179(j). a) On or about August 2, 2019, in the general manufacturing area, the employer did not inspect the bridge crane used by the employees, located next to the southern or front wall of the building, before initial use. b) On or about August 2, 2019, in the general manufacturing area, the employer did not inspect the radial arm crane used by the employees, located in the CNC area of the building, before initial use.
Recent events (1)
- — Z (O) $0
1910.179 J03
- Issued
- Nov 18, 2019
- Abate by
- Dec 13, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(3): Complete inspections of the crane was not being performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section: a) On or about August 2, 2019, in the general manufacturing area, the employer failed to perform periodic inspections to ensure that the bridge crane located next to the southern or front wall of the building was safe to operate. b) On or about August 2, 2019, in the general manufacturing area, the employer failed to perform periodic inspections to ensure that the radial arm crane located in the CNC area of the building was safe to operate.
Recent events (1)
- — Z (O) $0
1910.1020 G01
- Issued
- Nov 18, 2019
- Abate by
- Jan 7, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1020(g)(1): Employees covered by 29 CFR 1910.1020 were not informed, upon entering employment and at least annually thereafter, of the existence, location, availability of any records covered by this section, of the identity of the person responsible for maintaining and providing access to records, or of each employee's right of access to these records: a) On or about August 2, 2019, throughout the facility, the employer failed to provided with the information to the employees on the existence, location, availability of medical and safety records and any records covered by this section.
Recent events (1)
- — Z (O) $0
1910.1200 E01 I
- Issued
- Nov 18, 2019
- Abate by
- Jan 7, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1)(i): The employer did not compile a list of the hazardous chemicals known to be present using a product identifier that was referenced on the appropriate safety data sheet. a) On or about August 2, 2019, throughout the facility, the employer failed to compile a list of all chemicals stored and used in the workplace for the employees' information.
Recent events (1)
- — Z (O) $0
More inspections at AUS Manufacturing Company LLC
View AUS Manufacturing Company LLC's full OSHA safety record →
More inspections in this industry (NAICS 332313)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344203708.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.