Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: JOSE MANUEL LOPEZ DBA J & L TRIM CARPENTRY

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JOSE MANUEL LOPEZ DBA J & L TRIM CARPENTRY in 116 MERILL STREET, PARK RIDGE, IL 60068 (NAICS 238350). OSHA activity number 344204508.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Jose Manuel Lopez DBA J & L Trim Carpentry — free Get an email when a new federal OSHA severe-injury report for Jose Manuel Lopez DBA J & L Trim Carpentry is published. One employer, no account, unsubscribe in one click.
Site address
116 MERILL STREET
City
PARK RIDGE
State
IL
ZIP
60068
Mailing
16501 LOUIS AVE., SOUTH HOLLAND, IL 60473
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238350
Employees
2
Ownership type
A

4 citations on file for this inspection.

1926.404 B01 II

Serious Gravity 5 6 instances 1 exposed
Issued
Aug 6, 2019
Abate by
Aug 12, 2019
Penalty
Initial $2,273 · Current $1,300 Reduced
29 CFR 1926.404(b)(1)(ii): On a construction site, where an assured equipment grounding program was not utilized, all 120-volt, single-phase, 15 and 20 ampere receptacle outlets which were not a part of the permanent wiring of the building or structure and which are in use by employees did not have approved ground fault circuit interrupters for personal protection:   a) On or about July 31, 2019, employees were provided with electrical tools and equipment connected by temporary extension cords without the use of an assured equipment grounding program or ground fault circuit interrupters (GFCI).     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1300
  • — Z (S) $2273

1926.405 A02 II J

Other-than-serious 1 instance 2 exposed
Issued
Aug 6, 2019
Abate by
Aug 12, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.405(a)(2)(ii)(J): Extension cord sets used with portable electric tools and appliances were not designed for hard or extra-hard usage:      a) On or about July 31, 2019, a temporary power tap device used to provide electricity to tools and equipment was not designed for hard or extra hard use.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1926.405 G02 IV

Other-than-serious 6 instances 2 exposed
Issued
Aug 6, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws:      a) On July 31, 019, Flexible cords provided for employee use did not have strain relief to prevent pull being directly transmitted to joints and terminal screws.    No abatement certification or documentation required for this violation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1926.416 E01

Other-than-serious 6 instances 2 exposed
Issued
Aug 6, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used:      a) On or about July 31, 2019, worn and frayed electrical cords were used to supply electricity to tools and equipment at the site.      No abatement certification or documentation required for this violation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Jose Manuel Lopez DBA J & L Trim Carpentry's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344204508.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.