MINEOLA, NY —
OSHA Inspection: D. REIS FURNITURE MANUFACTURING CORP.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of D. REIS FURNITURE MANUFACTURING CORP. in 327 SAGAMORE AVENUE, MINEOLA, NY 11501 (NAICS 337122). OSHA activity number 344292123.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D. REIS FURNITURE MANUFACTURING CORP.
- Site address
- 327 SAGAMORE AVENUE
- City
- MINEOLA
- State
- NY
- ZIP
- 11501
- Mailing
- 327 SAGAMORE AVENUE, MINEOLA, NY 11501
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337122
- Employees
- 61
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.213 C03
- Issued
- Oct 31, 2019
- Abate by
- Nov 20, 2019
- Penalty
- Initial $10,210 · Current $6,126 Reduced
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non-kickback fingers or dogs designed to provide adequate holding power for all thicknesses of materials being cut: a) Worksite: Employees operating Martin Table Saw Type T72A, serial no. V422291, were exposed to amputation hazards in that the equipment did not have non-kickback fingers; on or about 5/3/19. b) Worksite: Employees operating Martin Table Saw Type T72A, serial no. V422291, were exposed to amputation hazards in that the equipment did not have non-kickback fingers; on or about 9/19/19. c) Worksite: Employees operating Martin Table Saw Type T72, serial no. V163729, were exposed to amputation hazards in that the equipment did not have non-kickback fingers; on or about 9/19/19. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $6126
- — Z (S) $10210
1910.213 C01
- Issued
- Oct 31, 2019
- Abate by
- Nov 13, 2019
- Penalty
- Initial $20,420 · Current $12,252 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) Worksite: Employees operating Martin Table Saw Type T72A, serial no. V422291, were exposed to amputation hazards in that the point of operation was not adequately guarded; on or about 5/3/19. b) Worksite: Employees operating Martin Table Saw Type T72A, serial no. V422291, were exposed to amputation hazards in that the point of operation was not adequately guarded; on or about 9/19/19. c) Worksite: Employees operating Martin Table Saw Type T72, serial no. V163729, were exposed to amputation hazards in that the point of operation was not adequately guarded; on or about 9/19/19. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19. D. Reis Furniture Manufacturing Corp. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.213(c)(1), which was contained in OSHA inspection number 1224004, citation number 1, item number 2 issued on 9/14/2017 and was affirmed as a final order on 9/26/2017, with respect to a workplace located at 327 Sagamore Avenue in Mineola, NY.
Recent events (2)
- — I (R) $12252
- — Z (R) $20420
1904.39 A02
- Issued
- Oct 31, 2019
- Penalty
- Initial $14,587 · Current $8,754 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye: a) Worksite: The employer did not notify OSHA within 24 hours of a work-related incident that resulted in an amputation; on or about 5/3/19. Note: Because abatement of this violation is already documented in the casefile, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19. D. Reis Furniture Manufacturing Corp. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1904.39(a)(2), which was contained in OSHA inspection number 1224004, citation number 2, item number 1 issued on 9/14/2017 and was affirmed as a final order on 9/26/2017, with respect to a workplace located at 327 Sagamore Avenue in Mineola, NY.
Recent events (2)
- — I (R) $8754
- — Z (R) $14587
More inspections at D. Reis Furniture Manufacturing Corp.
View D. Reis Furniture Manufacturing Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 337122)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344292123.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.