Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BEAUMONT PRODUCTS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of BEAUMONT PRODUCTS, INC. in 1560 BIG SHANTY DRIVE, KENNESAW, GA 30144 (NAICS 325612). OSHA activity number 344295027.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Beaumont Products, INC. — free Get an email when a new federal OSHA severe-injury report for Beaumont Products, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1560 BIG SHANTY DRIVE
City
KENNESAW
State
GA
ZIP
30144
Mailing
1560 BIG SHANTY DRIVE, KENNESAW, GA 30144
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
325612
Employees
150
Ownership type
A

5 citations on file for this inspection.

1910.22 A01

Other-than-serious 1 instance 2 exposed
Issued
Feb 19, 2020
Penalty
Initial $7,711 · Current $2,386 Reduced
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces were not kept in a clean, orderly, and sanitary condition.    (a) Soap Manufacturing Area: On or about 8/22/19, and at times prior, the employees were exposed to slip hazards, in that the work area was slippery from the soap residue while working or walking in the area.
Recent events (2)
  • — I (O) $2386
  • — Z (S) $7711

1910.37 A03

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 19, 2020
Penalty
Initial $9,639 · Current $5,000 Reduced
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:    a) Receiving (Bldg. 1550): On or about 8/22/19, and at times prior, the employer exposed employees to fire hazards, in that the exit route was blocked by debris within the exit route while performing tasks such as data input or receiving materials.
Recent events (2)
  • — I (S) $5000
  • — Z (S) $9639

1910.212 A03 II

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 19, 2020
Penalty
Initial $9,639 · Current $7,000 Reduced
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s}:    a) Soap Cutter: On or about 8/22/19, and at times prior, the employer exposed employees to amputation hazards in that point of operation on equipment such as, but not limited to fabricated soap cutter was not guarded while employees were fabricating product such as bar soap.
Recent events (2)
  • — I (S) $7000
  • — Z (S) $9639

1910.219 F03

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 19, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed:     Soap Cutter: On or about 8/22/19, and at times prior, the employer exposed employees to a caught in hazard in that the sprocket and chain on the soap cutter was missing a guard while employees were cutting soap for manufacturing of soap products.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H03 IV

Other-than-serious 1 instance 1 exposed
Issued
Feb 19, 2020
Penalty
Initial $5,783 · Current $2,000 Reduced
29 CFR 1910.1200(h)(3)(iv):   The details of the hazard communication program developed by the employer, did not include an explanation of the  safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information:    a.) Warehouse: On or about 8/22/19, and at times prior, the employer exposed an employee to chemical hazards, in that training to address safety data sheets (SDS) was not provided to an employee who handles corrosive hazardous chemicals EcoSense while manufacturing products.
Recent events (2)
  • — I (O) $2000
  • — Z (S) $5783

View Beaumont Products, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344295027.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.